Measure stationary surface temperatures with Anritsu A Series contact probes. Select the head size, guard and shaft arrangement to suit the measurement point and operating temperature.

• Head diameters: 27 mm, 15 mm or 12 mm.
• Temperature range: From -50°C, with upper limits of 200 to 800°C depending on construction.
• Thermocouple: Type K or Type E.
• Configuration: Multiple shaft shapes, lengths, cable and connector options.

Need help maintaining surface contact as the holding angle changes? Compare the Anritsu AX Series flexible-head surface probe.

The Anritsu ACS II series provides controlled temperature sources for calibrating and checking contact temperature probes. Choose a dedicated surface calibrator, an internal probe calibrator or a combined system to suit your measurement work.

• Surface calibration: ACS II-1000 to 300°C and ACS II-2000 to 500°C.
• Internal probe calibration: ACS II-3000 to 500°C.
• Combined capability: ACS II-4000 for surface and internal probes to 500°C.

The Anritsu AM-8000 series temperature datalogger is a portable instrument available in 6- and 12-channel models for recording multiple measurement points. Internal memory stores readings for transfer to a PC using dedicated software.

Discontinued model: The AM-8000 series has been replaced by the Anritsu AM-9000 series.

The Anritsu AM-9000 series temperature datalogger records measurements across 6 or 12 channels, with fixed thermocouple and multi-input models available. Store readings in internal memory and transfer them to a PC through USB using optional AMS-950 analysis software.

• Choose your configuration: AM-9000, AM-9100, AM-9200 or AM-9300.
• Recording capacity: 120,000 readings.
• Power options: AA batteries or an optional AC adapter.

AMS-950 software is sold separately.

The Anritsu AP-400 and AP-450 printing thermometers produce temperature records directly at the measurement point. Use manual printing for inspection rounds or interval printing to follow temperature changes.

• Built-in printer: Print readings with time information.
• Memory: Store up to 100 readings for batch printing.
• Model choice: AP-400 with ASP connector or AP-450 with ANP connector.
• Probe selection: Match the fixed thermocouple type and connector; probes are sold separately.

The Anritsu AR-6500 series combines non-contact infrared measurement with a Type K contact thermometer input. Use a compatible contact probe as a reference for automatic emissivity setting.

• Temperature options: -50 to 500°C or 0 to 1200°C, depending on model.
• Small measurement area: Defined optics for checking individual surface targets.
• Output options: AR-6501 versions provide a 1 mV/°C analog output.
• Contact probes: Selected separately to suit the application.

Anritsu AX Series surface temperature probes with a flexible contact-support head for stable measurement on stationary surfaces.

• Temperature range: Up to -50°C to 800°C depending on head construction.
• Flexible head: ±4° movement for improved surface contact.
• Thermocouple: Type K or Type E.
• Configuration: Select head size, guard, pipe shape, length, cable and connector.

Anritsu BC Series needle probes for measuring the internal temperature of food, liquids and semi-solid materials.

• Waterproof: IPX5 construction for washing under running water.
• Temperature range: Up to -200°C to 300°C depending on model.
• Thermocouple: Type K or Type E.
• Configuration: Select probe diameter, length, coating, cable and connector.

Anritsu BR Series flexible low-temperature probes for measuring air, liquids and semi-solid materials in cold and controlled environments.

• Temperature range: -100°C to 200°C.
• Thermocouple: Type K or Type E.
• Response time: Approx. 1.5 seconds.
• Configuration: Select thermocouple length, tape length, cable and connector.

Measure the internal temperature of liquids and semi-solid materials with Anritsu BS Series temperature probes. Choose a fine sleeve-type probe or a grip-type assembly according to the measurement depth, access and handling requirements.

• Thermocouple: Type K or Type E.
• Probe diameter: 0.9–5.0 mm, depending on model and coating.
• Temperature range: -200°C to 200°C, 300°C or 500°C, depending on construction.
• Configuration: Select probe length, fluororesin coating, cable and connector.

Measure temperature inside semi-solid materials with Anritsu BT Series needle temperature probes. Choose the needle diameter, length and tip shape to suit the measurement depth and material being tested.

• Thermocouple: Type K or Type E.
• Temperature range: -200°C to 210°C, 300°C or 500°C, depending on model.
• Needle options: Fixed or replaceable construction, with cut or sharp tips.
• Spare parts: BTN replacement needles for compatible BT-3 to BT-8 models.

Anritsu CR Series temperature probes for checking the tip temperature of soldering irons.

• Temperature range: 0°C to 500°C.
• Tip sizes: Below Ø1.5 mm or Ø1.5 to Ø4 mm.
• Thermocouple: Type K or Type E.
• Response time: Approx. 5 seconds.

Measure small stationary surfaces with Anritsu CS Series micro surface temperature probes. Choose the sensing head, shaft arrangement and connector to suit the measurement point and your thermometer.

• Head sizes: 3 mm, 4.2 mm or 6 mm diameter, and 2 × 10 mm rectangular options.
• Temperature range: -50 to 400°C, or -50 to 600°C for CS-7 models.
• Thermocouple: Type K or Type E.
• Configuration: Straight or angled shaft, with grip and gripless options.

The Anritsu FL Series fiber optic thermometers measure temperature in microwave, high-frequency and high-voltage environments where conventional electrical sensors can be difficult to use.

• Model options: FL-2000 with one channel or FL-2400 with four channels.
• Probe selection: Dedicated fiber optic probes for different temperatures, materials and operating conditions.
• Integration: Analog temperature output and RS-232C communication.
• Configuration: Temperature probes are selected separately and are not included with the instrument.

The Anritsu HD series handheld digital thermometers are discontinued and have been replaced by the Anritsu HR series .

For a replacement, match the instrument to your thermocouple type, probe connector and measurement requirements.

• Existing instrument: Provide the complete HD model number, including the E or K suffix.
• Probe connection: Confirm ASP or ANP connector type.
• Required functions: Specify memory, alarm, output or water-resistance requirements.

Anritsu HHT Series high-durability surface temperature probes for direct contact measurement of hot metal and industrial surfaces.

• HHT-4* Series: -50°C to 800°C.
• HHT-5* Series: 300°C to 1100°C.
• Thermocouple: Type K.
• Pipe forms: Straight, 45° and 90°.

The Anritsu HR series handheld digital thermometer offers Type K or Type E thermocouple models for contact temperature measurement. Choose from basic, standard, LED-display and memory versions, then match the instrument with a probe suited to your application.

• Model choices: HR-1100/1150 through HR-1750.
• Probe connections: ASP or ANP, depending on model.
• Application options: Selected models offer IPX5-equivalent water resistance; HR-1500/1550 models provide memory recording.

Temperature probes are sold separately.

Attach an Anritsu MG Series magnetic temperature probe to a suitable stationary metal surface for contact temperature measurement. Built-in magnets hold the sensing head in position, reducing the need to maintain pressure by hand.

• Surface: Stationary, magnetically receptive metal.
• Temperature range: -50°C to 250°C or 400°C, depending on model.
• Thermocouple: Type K or Type E.
• Head options: Rectangular 27 × 32 mm, circular 14 mm or compact 8 mm configurations.

Anritsu SF Series extra-fine flexible temperature probes for internal measurement in liquids, materials and confined locations.

• Temperature range: -50°C to 200°C.
• Thermocouple: Type K or Type E.
• Fine-wire length: 500, 1000, 1500 or 2000 mm.
• Response time: Approx. 2 seconds.

Anritsu ST and STN Series flexible flat-leaf temperature probes for surface attachment, narrow spaces and temperature distribution measurement.

• Temperature range: Up to -50°C to 400°C depending on coating and tape length.
• Thermocouple: Type K or Type E.
• Construction: Standard or narrow tape with sharp or flat tip.
• STN Series: Replaceable tape-type sensing elements.

Anritsu SX Series high-accuracy surface temperature probes with a flexible contact-support head for stable measurement on stationary surfaces.

• Temperature range: -50°C to 300°C or -50°C to 800°C.
• Flexible head: ±4° movement for improved surface contact.
• Response: 1 second to 99% response.
• Thermocouple: Type K or Type E.

Measure moving and rotating surface temperatures with Anritsu U and UX Series contact probes. Select the head, guard or wheel arrangement to suit the surface profile, temperature and operating conditions.

• U series: Moving-surface probes with multiple head and mounting configurations.
• UX series: Contact-support head that helps maintain contact during measurement.
• Thermocouple: Type K or Type E.
• Temperature: -50°C to 200°C or 250°C, depending on construction.

Anritsu UX Series flexible-head temperature probes for measuring moving and rotating surfaces with stable contact during measurement.

• Temperature range: Up to -50°C to 250°C depending on configuration.
• Surface speed: Up to 24 km/h or 36 km/h depending on head size.
• Thermocouple: Type K or Type E.
• Head movement: 360° movement with contact-support function.

Anritsu VA Series clip-type surface temperature probes for measuring the temperature of small heat pipes and cylindrical surfaces.

• Heat pipe sizes: Ø3, Ø4, Ø5 and Ø6 mm.
• Temperature range: -50°C to 300°C.
• Thermocouple: Type K or Type E.
• Response time: Approx. 2 seconds.

The Anritsu WE Series measures stationary surface temperatures using a self-supporting probe placed on the measurement target. Select the probe configuration to suit the surface, temperature and connected thermometer.

• Contact measurement: Sensing element rests against the target surface.
• Self-supporting design: For suitable surfaces where the probe can remain stable during measurement.
• Configuration: Confirm the complete model code, thermocouple type, cable and connector.

Find replacement recording pens, ink ribbons and cartridge pens for chart recorders and thermohygrographs. Match the consumable to the instrument model, existing part number and required ink colour.

• Recorder brands: Yokogawa, Chino, Dickson, Sekonic and ABB Kent.
• Thermohygrograph enquiries: Sato, Isuzu and Hisamatsu.
• Consumable options: Pens, ribbon cassettes, recording heads and refill ink, depending on the instrument.
• Identification: Use the references below or provide photographs of the existing consumable and instrument nameplate.

Original Dickson circular chart paper for compatible Dickson chart recorders.

• Chart sizes: 3", 4", 6" and 8".
• Recording periods: 5-hour, 8-hour, 12-hour, 24-hour, 7-day and 31-day options.
• Packing: 60 sheets per pack.

Dickson circular chart recorders provide a paper record of temperature, humidity, pressure or external transmitter signals, depending on the model. Select the recorder by measurement type, chart size, recording period and installation requirements.

• Temperature and humidity: KT8 and TH8 models for temperature-only or combined temperature and relative humidity recording.
• Pressure: PW4 and PW8 families with 4-inch or 8-inch circular charts.
• Universal input: Legacy ET855 recorder information for existing voltage and current signal installations.
• Replacing an older recorder? Refer to the model comparison below before ordering a replacement or consumables.

Dickson OCEAView™ brings wireless environmental monitoring, alarm notifications and traceable records into one platform. Monitor temperature, humidity and other critical parameters using compatible data loggers and sensors for refrigerators, freezers, laboratories, pharmaceutical storage and cold rooms.

• Connected monitoring: LoRaWAN and Bluetooth logger options for fixed equipment and mobile applications.
• Actionable alerts: Email, SMS and voice notification options for excursions and technical alarms.
• Traceable records: Audit trails, measurement history and reporting tools.
• Deployment choice: Cloud or on-premises software.

Record pressure changes over time with Dickson PR125, PR325 and PR525 pressure data loggers. The battery-powered display models store readings at the measurement point for later download and review.

• Pressure ranges: PR125: 0–100 psi; PR325: 0–300 psi; PR525: 0–500 psi.
• Local display: Segmented LCD for checking readings.
• Recording: 64,768 readings with sampling intervals from 1 second to 24 hours.
• Construction: IP68 enclosure with a 1/4-inch NPT pressure connection.
• Data retrieval: USB or compatible memory card; DicksonWare software sold separately.

Record pressure changes on paper with Dickson PW4 and PW8 pressure chart recorders. Choose a compact 4-inch recorder or a larger 8-inch chart format to suit your installation and recording requirements.

• Pressure ranges: Models covering 0–100, 0–200, 0–300, 0–500 or 0–1000 psi, depending on the series.
• Recording periods: 24-hour or 7-day operation, depending on the model.
• Local recording: Battery-powered chart drive with a visible paper trace.
• Selection: Match the pressure range, recording period, connection and chart reference before ordering.

The Dickson TWP touchscreen data logger displays readings and measurement history on an 8-inch colour screen. Configure it for temperature, humidity or differential pressure monitoring using compatible replaceable sensors.

• Local monitoring: Touchscreen display with audible and visual alarms.
• Data access: USB download and Wi-Fi/Ethernet connectivity.
• Remote monitoring: DicksonOne cloud access and notification features require the appropriate subscription.

The EDL CRYO-CAL-2 cryostat provides a low-temperature environment for comparison calibration of temperature sensors. Liquid nitrogen supplies the cooling, with a standard block accommodating up to four sensors.

• Temperature range: -196 to 0°C.
• Cooling: Liquid nitrogen, without a compressor refrigeration system.
• Sensor arrangement: Four wells with tubes and spacer options.
• Current manufacturer designation: CRYO-CAL-2-LI; confirm configuration when ordering.

EDL Practi-Cal PRI portable dry well and surface calibrator for checking insertion and contact temperature sensors.

• Models: PRI-1 and PRI-2.
• Temperature range: Ambient to 350°C or 650°C.
• Calibration: Interchangeable blocks for insertion and surface probes.
• Portable: Compact design for laboratory and field use.

EDL SBB Single Black Body infrared calibrators for checking handheld and installed IR thermometers and pyrometers.

• Models: SBB-1, SBB-2 and SBB-3.
• Temperature coverage: -30°C to 650°C across the series.
• Target: 2" diameter black body with 0.986 emissivity.
• Use: Laboratory, quality control and field calibration of infrared instruments.

EDL Ultra Bath stirred liquid temperature calibrators for stable comparison calibration of thermometers and temperature probes.

• Models: UB-4010, UB-1020 and UB-2050.
• Temperature coverage: -40°C to 550°C across the series.
• Bath capacity: 42 litres with an 18" deep tank.
• Suitable for: RTDs, PRTs, SPRTs, thermometers and insertion temperature probes.

The Elster Kent H4000 Woltmann water meter measures accumulated cold water consumption for commercial, industrial and water distribution applications.

• Measurement: Bulk cold water metering with a totalising register.
• Sizes listed: DN50, DN80, DN100, DN150 and DN200.
• Operating limits: Water temperature up to 50°C and working pressure up to 16 bar.
• Installation: Suitable for horizontal, vertical or inclined pipelines, subject to installation requirements.

The Evikon E2218-DM duct humidity and temperature transmitter measures air conditions inside ventilation ducts and provides calculated dew point and absolute humidity values.

• Duct installation: 200 mm insertion probe.
• Analog signals: Two configurable outputs, selectable as 4–20 mA or 0–10 V.
• Digital communication: RS485 Modbus RTU.
• Protection: IP65-rated transmitter enclosure.

The Evikon E2244 humidity and temperature transmitter measures relative humidity and air temperature for connection to controllers, monitoring instruments and building management systems.

• Measurements: Relative humidity and temperature in air and non-aggressive gases.
• Analog outputs: 2 × 4–20 mA and 2 × 0–10 V.
• Construction: IP65-rated enclosure.
• Mounting: E2244 wall-mount and E2244-DM duct-mount versions.

The Evikon E2418-DF differential pressure transmitter measures small pressure differences in dry, clean air. Connect it to a compatible building management system, PLC or monitoring system for HVAC and room pressure applications.

• Models: E2418-DF-50 and E2418-DF-500.
• Measuring ranges: −50 to +50 Pa or −500 to +500 Pa.
• Analogue outputs: Two outputs selectable as 4–20 mA or 0–10 V.
• Communication: RS485 Modbus RTU.
• Enclosure: IP65-rated wall-mount housing.

Evikon Gas Transmitter E2618 series is intended for measurement of gases with high accuracy 

Features:

- Industrial enclosure with IP65 protection

- Attached or remote sensor options

- Two analog outputs settable to 4-20 mA or 0-10 V

- RS485 Modbus RTU digital interface

- Power supply 12...36 VDC (default), 24 VAC as option

Check timber and building materials without penetrating pins using the Exotek MC-380XCA moisture meter. Two scanning modes help you compare moisture indications near the surface and through a greater material depth.

• Dual scanning modes: Nominal 10 mm and up to 100 mm scanning depths, depending on the material.
• Material selection: Wood and building-material groups with density settings.
• Inspection tasks: Timber receiving, furniture production, flooring preparation and damp investigations.
• Practical functions: Reading hold, adjustable audible alarm and automatic power-off.

Check moisture in paper and cardboard without puncturing the material using the Exotek MC-60CPA pinless moisture meter. Place the sensor against the surface for quick checks on suitable paper rolls, stacks and reams.

• Non-destructive measurement: Capacitance sensing without penetrating pins.
• Applications: Paper production, printing, packaging and incoming material inspection.
• Material selection: Select the appropriate material group for the paper or board being checked.
• Portable operation: Handheld digital meter powered by a 9 V battery.

Reveal contact pressure and uneven loading with FUJIFILM Prescale pressure measurement film. The film develops a red impression where pressure is applied, helping you inspect the contact pattern between mating surfaces.

• Pressure range: Nine standard grades covering 0.006–300 MPa.
• Applications: Roller contact, press platens, clamping, assembly and gasket contact checks.
• Film construction: Two-sheet and mono-sheet types, depending on the selected grade.
• Selection: Choose according to expected contact pressure, temperature, humidity and loading duration.

Original Isuzu chart paper for compatible thermohygrographs and chart recorders.

• Recording periods: Daily, 7-day and 31-day charts.
• Chart references: Multiple references for different Isuzu recorder models.
• Selection: Match the chart reference, recorder model and measuring scale before ordering.

The Isuzu TH27R (TH-27R) thermohygrograph is discontinued. For a replacement temperature and humidity chart recorder, choose the Sato NSII-Q (Sigma II).

• Replacement options: Sato 7210-00 or 7211-00, depending on the temperature range required.
• Paper recording: Records temperature and relative humidity on a rotating chart.
• Before ordering: Confirm the recording period and matching chart paper.

View the Sato NSII-Q replacement

Find the correct Kobayashi recording chart paper for your instrument using the chart number, recorder model and printed scale. Options include roll, fan-fold and rectangular charts for compatible industrial and environmental recorders.

• Applications: Temperature, humidity, pressure, weather and process recording.
• Selection: Match the paper dimensions, feed arrangement, scale and recording period.
• References: Extensive chart-number listings, including Sekonic, Sato and other recorder requirements.
• Identification: A photograph of the existing chart and packaging helps confirm the correct specification.

The KOFLOC 6800 series regulates pressure on the upstream side of a gas system by releasing gas when pressure exceeds the selected setting. Its compact design suits panel-mounted equipment and tank pressure control.

• Pressure settings: 0.01–0.3 or 0.01–0.6 MPa(G), depending on model.
• Maximum exhaust flow: 0.8, 1 or 10 L/min, depending on model and operating conditions.
• Connections: Rc 1/4 or Rc 1/8.
• Selection: Four versions with material options to suit the gas.

KOFLOC thermal mass flow meters and controllers measure or regulate gas flow in laboratory equipment, gas supply systems and industrial processes. Select a mass flow meter for measurement, or a mass flow controller for automatic regulation to a setpoint.

• Gas selection: Air, nitrogen and other compatible gases, with the appropriate calibration.
• Model options: Standard meters, display-equipped instruments and metal-sealed configurations.
• Integration: Analogue signals and digital communication depend on the selected model.
• Existing 8500/D8500 users: The discontinued series has a manufacturer-designated alternative in the 8700 range, subject to configuration checks.

Monnit ALTA Wireless Carbon Dioxide Sensor uses an ultra low-power, high-performance CO2 sensor to measure the amount of carbon dioxide in ambient air.

- Measures 0 to 10000 ppm CO2
- Accurate to +/- 45 ppm + 3% of reading
- Sensor produces instantaneous CO2 readings and 8 hour time weighted average(TWA) readings