Monnit ALTA Soil Moisture Sensor measures soil moisture tension & soil temperature within the soil. It uses a resistive granular matrix element to accurately measure the matric water potential (soil moisture tension) in the soil and a thermistor based temperature element to measure temperature.

- Safe to use in both hot & freezing temperatures
- Reports matric potential (soil water tension) 
- Moisture readings in centibar & kPa
- 0 to 240 centibar (kPA)
- Will not dissolve in soil
- Internally compensated for commonly found salinity levels
- Easy to install and use compared to traditional tensiometers
- Stainless steel electrodes
- No maintenance required
- Temperature readings in C/F.
- 5 ft removable lead 

Monnit ALTA® Wireless Thermocouple Sensors leverage Monnit’s award-winning remote monitoring platform to remotely monitor high-temperature applications, such as commercial ovens, kilns, and chimneys. Users benefit from a wireless data transmission range of 1,200+ ft, bank-grade security, and a temperature range of up to 400°C (752°F).

Monnit’s thermocouple is user-programmed to sleep for a specified interval, awake, capture analog data, and then convert this measurement into a temperature. If the sensor captures temperatures outside of user-specified thresholds, an alert is sent via text, email, or call. Monnit’s hardwired thermocouples feature a needle-style probe at the end of a 6’ lead (a K-Type Quick Connect Thermocouple is also available).

Anritsu Low Temperature Probe BR Series probes are ideal for measuring temperature inside of freezer, refrigerator, incubator or drying oven. 

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu MG Series Magnetic Probe are temperature sensors designed for stationary surfaces.
Built-in magnets allow these probes to be attached to measurement targets. Specific components may be combined to customize products for the needs of a customer's specific application.

Ryutai Kogyo Metal Tube flow transmitter MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.

MCF series are now used in the computer-controlled flow system.

The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.

The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.

Ryutai Kogyo Model GTF and ATF is widely used for its high quality and ease of use. This flow meter is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of liquid or gas with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.l There are widely used for its high quality and ease of use

Anritsu CS series probes are small surface temperature sensors designed to measure the temperature of stationary surface.Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu U series probes offer minimal coefficient of friction between the sensor and measuring surface, making them ideal for measuring the temperatures of moving or rotating surfaces.Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu MW series probes are ideal for measuring the temperatures at the surface of moving wires. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu BS series probes are internal temperature sensors designed to measure the temperatures of liquid or semi-solid materials. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu BC series probes are internal temperature probes designed to measure the center temperature of food, liquid or semi-solid materials.It is waterproof (IPX5) and can be washed with running water, so you can use it cleanly and hygienically.In order to prevent contamination, the probes designed to prevent the parts falling off.

Depending on the application, it is possible to combine the outside diameter, length, presence of coating of the protective pipe and plug shape.

Sato Non Contact Countdown Timer TM-27 TM-29 is a sanitary-designed countdown timer. You can start the timer by putting your hand over the non-contact sensor without touching. This is helpful to improve efficiency of your work

Anritsu AR-6500 series infrared thermometers are capable of non-contact temperature measurement and come with contact type thermometer functions

TOKICO FLOWMETER, TOKICO OIL FLOWMETER a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range.

The Exotek MC-60CPA is a new generation of microprocessor controlled, pocket size handheld moisture meter.

Exotek MC-60CPA is accurate, reliable and simple to use for rapid and non-destructive determination of the moisture content of paper and paperboard on rolls, stacks or reams. By pressing the sensor against the paper, the moisture content will be displayed within seconds.

Exotek MC-60CPA can be used in production, inspection control and further treatment of paper materials.

The choice of material code makes measurements more accurate. There are 5 selectable material codes for paper.

Ryutai Kogyo Pitot Cell Flowmeter is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min

Elster Kent Helix Woltmann cold water meter can be installed in horizontal, vertical or inclined pipelines without loss of accuracy. This meter not only conforms to relevant BS, ISO and EEC standards, but offers user benefits which greatly exceed these specifications.

TOKICO FLOWMETER, TOKICO OIL FLOWMETER is a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range.

Compact, self contained Kofloc Mass Flow Meters are designed to read flow rates of gases. The rugged design coupled with instrumentation grade accuracy provides versatile and economical means of flow control.

Fuji Prescale Film

Palmer Aluminum Case Pressure and Temperature Chart Recorders provide proven reliability for accurate measurement and recording of pressure and temperature in many applications. Since 1962 we have manufactured and supplied recorders for industry in the U.S. and around the world. Palmer Recorders are designed for indoor or outdoor use, and provide long service life, even in harsh conditions. Many of our Recorders are still in service after 50 years!

Dickson Pressure Datalogger

Al the pressure data loggers feature remote downloads, IP ratings, and a variety of ranges. Works with the latest version of DicksonWare.

Choose from:

• 0-100, 0-300, 0-500 PSI
• PSI, ATM, Bar, mBar, InH2O, FtH2O, mmH2O, mmHG, InHG, Pascal, kP, MC
• IP68 resistant case
• 1-second sampling rate
• USB or USB/Flash card options  for data retrieval
• Delayed Start (PR125/325 only)

Dickson Pressure Recorder PW470 / PW474 / PW476 / PW479 / PW875 / PW860 / PW861 / PW864 / PW866 / PW867

The Wahl SS Series Silicon Pressure Transducers / Transmitters are extremely reliable, small and lightweight piezoresistive pressure sensors in a compact, rugged, all 304 stainless steel housing and sensor, rated at IP67.

The Wahl CS Series Ceramic Pressure Transducers / Transmitters utilize a ceramic pressure measurement sensor that is highly resistant to corrosion and chemicals. These sensors are extremely reliable, small and lightweight piezoresistive pressure sensors in a compact, rugged, all 304 stainless steel body, rated at IP67.

We supplies variety range of recording consumables, such as recording pen, ink ribbon, recording head, cartridge pen, refillable ink and others for recorder and thermohygrograph of various brands, such as:
ABB Kent
Dickson
Hisamatsu
Isuzu
Sato
Sekonic
Yokogawa

Sato Refractometer SK100R, SK200R series measures liquid content by determining the refractive index of the liquid, based on the principle of total internal reflection.

Anritsu UX series is temperature probes suitable for measuring the temperature of moving or rotating surfaces.

Since it has a contact support function, it does not easily shake even if it comes into contact with a moving object, and it is easy to adhere to the object to be measured.

Specific components may be combined to customize products for the needs of a customer's specific application.

Sekonic C-7000 Handheld spectrometer, designed especially for industrial use.

Main Measurement & Function

• Illuminance ★- 1 to 200,000lx in ambient / 20 to 20,500lx・ s in flash
• Color temperature ★ - 1,563 K to 100,000 K
• Color rendering index - CRI (Ra, R1 to R15, comparison), TM-30 (Rf, Rg), SSI, TLCI/TLMF
• Spectrum analysis : 380nm to 780nm
• PPFD (photosynthesis photon flux density)
• Chromaticity coordinates indication
• Continuous / Single measurement selection

Sekonic Universal 6 channel Recorder SP-100 / SP100 records from different sources simultaneously, including mA, V, PT100, Thermocouple.

Anritsu WE series probes are temperature sensors designed for stationary surfaces. These self-supporting probes can be used to measure temperaturesimply by placing the probe on the measurement target.

Specific components may be combined to customize products for the needs of a customer's specific application.

The Tempmate S1 USB temperature data logger is perfectly adapted to the cold chain applications in the food industry (storage and transport ), but also for monitoring for all types of goods: pharmaceuticals, blood, transportation of works of art, flowers, paper, …

Anritsu Soldering Iron Probe CR Series is a temperature probes for the tips of soldering irons. Select the probe type best-suited to the diameter of your soldering iron tip.

Anritsu A series probes are general-purpose temperature sensors designed to measure the temperatures of stationary surfaces.
Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu AX series are the ultimate sensor for the surface temperature measurement: A series, and enhanced it by fitting it with Flexible head. They are the best suitable for any applications based on philosophy of "Simple is the best" and suit to any of your request.

Anritsu ACSⅡ series products are temperature calibration systems for surface temperature and internal temperature measuring devices.
Temperatures can be set across a wide range, from room temperature to 500°C. These calibration systems are designed for calibration or to check temperature measuring probes.

Sato Temperature and Humidity datalogger SK-L750 Series
Comes with software with graphical display on PC.

SK-L751 (Temperature Measurement) Cat No 8800-00
SK-L754 (Temperature and Humidity Measurement) Cat No 8870-00

Sato Temperature and Humidity Meter Highest II 7542-00.

Human hair bundle for humidity and a thermistor for temperature are used as sensors.

This hygrometer is designed with focus on reliability. Bracket for wall mounting is attached.

Yashima's temperature controller and transmitter accepts 15 type of different input from thermocouple, R.T.D. mA & DC voltage. Range setting & alternation can be easy done from thermocouple to R. T. D. or mA to DC voltage. It has programmable scale range and it is so easy that you may program it within few touches!

Sato 4-channel datalogger SK-L400T for temperature measurement with K type themocouple probes.

Possible to simultaneously display four temperatures from four different locations on the large LCD. The measured values can be logged on the SD card.

NB. Probes are separately purchased, not included in the main unit.

Sato SK-RHC-1 Temperature Transmitter is electric current 4 to 20mA output type in the SK-RHC series temperature/humidity transmitters.

3 types of probe are provided for SK-RHC series transmitters.

Select the suitable probe to your usage.

AC adapter is available at option.

(The probe shown in the photo is the plug-in type)

Sato Quartz Thermohygrograph NSII-Q, 7210-00, 7211-00

Isuzu Thermohygrograph TH27R TH-27R

Anritsu Thermometer with Printing Model AP-400 series thermometers have built-in printers for on-the-spot printing of measurement data.

AP-450, AP400 is replacement of AP-800 (AP-800K, AP-800E, AP-850K, AP-850E) series

Sato Tipping bucket type rainfall sensor 7980-S-40 is made of stainless steel.

Amount of rainfall is converted to electric contact signals and transmited to an event recorder or a magnetic counter with a two conductor cable

Dickson Touch Screen Data Logger TWP were made to simplify, yet enhance your monitoring experience. With a Dickson touchscreen TWP, you can view temperature, humidity or differential pressure data with nothing more than the touch of a finger. With access to your data right on the screen, proving historical monitoring during an audit has ever been easier.

Ryutai Kogyo Model ADF is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of water with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.

Sato SK-270WP-K is a simple operation waterproof digital thermometer.
Ideal for plants, laboratories, food factories and like that are required temperature management at the site using water.

Sato Waterproof DIgital Thermometer SK-1260 with memory and alarm function.

Suitable for temperature control and data management in laboratories, factories and offices. Various optional probes are available for a wide variety of applications.
Standard probe SK-S100K(K Thermocouple) is attached as accessories.

Note: No sensor convertibility for SK-1250MCIII α & SK-1260