:
Aichi Tokei ND Flowsensor is ideal for measuring variety of fluid and outputs open collector pulses with the built-in amplifier type magnetic sensor.
Features
| Item | Model | ||||||
| ND05 - TATAAA ND05- PATAAC |
ND05- NATAAC |
ND10- TATAAA |
ND10- PATAAA |
ND10- NATAAA |
ND20- PATAAA |
ND20- NATAAA |
|
| Flow-rate range | 0.3 - 3 L/min | 1.0 - 10L/min | 1.5 - 20L/min | 3.0 - 60L/min | |||
| Accuracy (Standard installation position) |
±2% (RS) | ||||||
| Pulse unit | 2.5mL/p | 7.69mL/p | 25mL/p | ||||
| Pressure drop | 12 kPa or less (At 3L/min) |
15 kPa or less (At 10L/min) |
20 kPa or less (At 20L/min) |
60 kPa or less (At 60L/min) |
|||
| Fluid temperature range | 0 to +60°C | 0 to +70°C | 0 to +60°C | 0 to +70°C | 0 to +60°C | 0 to +70°C | |
| Connection | R 1/2 | R 3/4 | |||||
| Weight | Approx.150g | Approx.120g | Approx.360g | ||||
| Maximum working pressure | 1MPa or less with a fluid temperature of +20°C | |
| Viscosity | 0.5 to 1.5 mPa·s | |
| Output signal | Open collector pulse 4-wires, Lead-wire length approx. 600mm |
|
| Duty ratio 3/7 < A/B < 7/3 | ||
| Impressed voltage range | 3 to 15 V DC | |
| Ambient temperature | -20° to +80° (Dew condensation must be avoided) | |
| Model | ND | |
| Fixed / Portable | Fixed | |
| Tolerance | Maximum temperature: up to 70 deg C Maximum pressure: 1Mpa |
|
| Measurement Range | from 0.3 to 60 L/min | |
| Connection | R1/2, R3/4 | |
| Accuracy | ± 2% RS | |
| Output | Pulse | |
|
Download |
|
Download |
Aichi Tokei ND Flowsensor is ideal for measuring variety of fluid and outputs open collector pulses with the built-in amplifier type magnetic sensor.
Features
Ryutai Kogyo Pitot Cell Flowmeter is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min
TOKICO FLOWMETER, TOKICO OIL FLOWMETER a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range.
RCM Direct Reading Differential Pressure Flowmeter for Liquid & Gas
TOKICO FLOWMETER, TOKICO OIL FLOWMETER is a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range.
Ryutai Kogyo Metal Tube flow transmitter MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.
MCF series are now used in the computer-controlled flow system.
The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.
The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.
Purge meters are variable area flowmeters that used to measure small flowrates.
It is suitable for liquid, gas, oil and compressed air.
Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.
It comes with stainless steel float and a metering a valve.
Elster Kent Helix Woltmann cold water meter can be installed in horizontal, vertical or inclined pipelines without loss of accuracy. This meter not only conforms to relevant BS, ISO and EEC standards, but offers user benefits which greatly exceed these specifications.
RCM general purpose Flo-Gard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow.
Our reed switches can also be ordered for use in hazardous location (Option IS), when fitted with
LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point and makes field calibration easy.
Ryutai Kogyo Model GTF and ATF is widely used for its high quality and ease of use. This flow meter is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of liquid or gas with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.l There are widely used for its high quality and ease of use
Ryutai Kogyo Model ADF is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of water with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.
