Elster Kent H4000 Woltmann Cold Water Meter

Ryutai Kogyo Model GTF and ATF is widely used for its high quality and ease of use. This flow meter is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of liquid or gas with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.l There are widely used for its high quality and ease of use

Purge meters are variable area flowmeters that used to measure small flowrates.
It is suitable for liquid, gas, oil and compressed air.
Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.
It comes with stainless steel float and a metering a valve.

Tokico electronic positive displacement flowmeters measure oil volume with a local digital display and optional signal outputs. Select the appropriate configuration for diesel, light oil, heavy oil, lubricants or crude palm oil (CPO).

• Measurement: Positive displacement principle with nominal accuracy of ±0.5% within the specified operating conditions.
• Local indication: Electronic display for convenient reading at the meter.
• System connection: Pulse, analogue and alarm functions depend on the selected counter configuration.
• Model selection: Match the flow range, viscosity, temperature, pressure and connection requirements.

For CPO and heated oils: Confirm fluid temperature, viscosity and material compatibility before selecting the meter.

The RCM Flo-Gage differential pressure flowmeter provides a direct local reading of liquid or gas flow. The mechanical indicator operates without external power and can be specified for water, compatible oils, compressed air and other gases.

• Clear indication: 90 mm analogue dial with a 270° scale.
• Performance: ±3% of full-scale accuracy over a 6:1 measuring range.
• Connections: Series 7000 threaded or Series 8000 wafer construction.
• Options: Material, alarm-switch and transmitter configurations to suit the application.

RCM Flo-Gard II liquid flow switches detect when flow crosses a selected setpoint, providing a contact signal for an alarm or equipment interlock. Applications include cooling-water circuits, chillers and compatible process-liquid systems.

• Switch options: One or two independently adjustable SPDT reed switches.
• Construction: Metal body with material and seal options to suit the liquid.
• Local indication: Optional LEDs show switching status.
• Installation options: General-purpose and intrinsically safe configurations, subject to the required specification.

Ryutai Kogyo Metal Tube flow transmitter MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.

MCF series are now used in the computer-controlled flow system.

The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.

The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.

Ryutai Kogyo Model ADF is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of water with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.

Tokico positive displacement oil flowmeters measure accumulated oil volume through a mechanical counter. Select the appropriate model for diesel, kerosene, heavy oil or other compatible oils.

• Model families: FGB, FRO, FRP and FRA for different flow capacities.
• Accuracy: Typically ±0.5% within the specified operating range.
• Local reading: Mechanical totaliser, with reset-counter options.
• Selection: Match the oil viscosity, temperature, flow rate and connection requirements.

For digital indication and signal-output options, see the Tokico electronic oil flowmeter.