Tokico Electronic Flowmeter
Tokico Electronic Flowmeter

Oil, Diesel, Crude Palm Oil (CPO) Electronic Positive Displacement Flowmeter

:

TOKICO FLOWMETER, TOKICO OIL FLOWMETER a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range.

Features

    • Measurement with high accuracy

      Because the fluid is directly measure, the integration accuracy of this flow meter is within ±0.5% (The accuract within ±0.2 is also available according to the demands for a dealing and a tax certificate, etc.) Especially, because a pair of roots is non-contact, a light material can be adopted for the TOKICO FLOWMETER. And low viscosity fluids can be measured with high accuracy and wide flow range.


    • Small size and light weight

      Because the roots is adopted for the rotor, discharging fluid volume in one rotation of rotor is larger and the roots meter is designed small and light.


    • Excellent stability of accuracy

      Mechanical parts of the roots meter do not wear because of non-contact rotation and there is little change of instrument accuracy in a long time operation.


    • Excellent durability

      Because the roots meter rotates without contact, the rotor is excellent in durability.


  • Small pressure loss

    The pressure loss is smaller than another displacement type flow meter because the rotors do not contact each other.


Suitable For:

  • Light Fuel Oil (Diesel)
  • Crude Palm Oil (CPO)
  • Heavy Oil
  • Other oil



Now with Electronic Display:

  • Battery replacement needless for 10 years
  • Easy-to-see large LCD Character new display unit
  • Easily adjustable display angle, adjusted at 15º steps over 180º range
  • Feasible to connect with various external devices: Pulse output / Analog output / Alarm output
  • Compatible with previous model



Tokico Electronic Oil Flowmeter



Model FGB, FRL Flowmeter
Accuracy ±0.5%
Flow range Refer to next table
Max Working Pressure 10kgf/cm2
Max Working Temperature FGB 1/2": 80 ºC (All type of oil)
FGB 3/4" & 1": 80 ºC kerosene, diesel and light oil, 120 ºC Heavy Oil
FRL All model: 50 ºC Kerosene, Diesel, Light Oil, 100 ºC heavy oil
Flange Rating JIS 10 kgf/cm2FF
Material Body:
FGB type: Bore 156mm - FC250 (Cast Iron), Bore 20, 25mm - FCD400 (Ductile Iron)
FRL type: FC250 Cast Iron
Rotor:
FGB type: Resin
FRL type: Aluminium alloy
Counter Unit Large Size Electronic Display
Output Pulse output / Analog output / Alarm output
(external power supply 12-24VDC is required)

Model Bore(mm) without output with output
FGB type 15 FGBB423BAL-75X FGBB423BAL-75P
FGB type 20 FGBB631BDL-75X FGBB631BDL-75P
FGB type 25 FGBB835BDL-75X FGBB835BDL-75P
FRL type 40 FRL0438BAA-75X FRL0438BAA-75P
FRL type 50 FRL0541BAA-75X FRL0541BAA-75P
FRL type 80 FRL0845BAA-75X FRL0845BAA-75P
FRL type 100 FRL1051BAA-75X FRL1051BAA-75P


Model Bore (mm) Flow Range (L/h) (Accuracy ±0.5%)
FGB
15
 Fluid Kerosene
Diesel
Light oil
 A heavy oil B, C heavy oil
20
 Viscosity 1.5mPa/s 5mPa/s 10~mPa/s 50~300mPa/s
25
 Normal operation 40~200 10~200 5~200 -
100~1250 40~1250 20~1250 10~1250
150~3000 100~3000 50~3000 25~1250
FRL
40
 Normal Operation Intermitent 1000~6000 800~7000 100~7000 10~6000
Continuous 1000~4500 800~6000 100~6000 100~4500
50
 Normal Operation Intermitent 2000~13000 1500~15000 250~15000 250~13000
Continuous 2000~9000 1500~13000 250~13000 250~9000
80
 Normal Operation Intermitent 5000~35000 3500~40000 600~40000 600~35000
Continuous 5000~25000 3500~35000 600~35000 600~25000
100
 Normal Operation Intermitent 16000~120000 12000~130000 4000~130000 4000~120000
Continuous 16000~85000 12000~120000 4000~120000 4000~85000



Mechanical version of Tokico Oil Flowmeter 
(Click Picture to View)

Tokico Oil Flowmeter


Download

 PD Electronic Oil Flowmeter - Catalogue (1.18M)


10 other products in the same category:

Metal Tube flow transmitter MCF
Quick view
Ryutai Kogyo

Metal Tube Flow Transmitter MCF

Ryutai Kogyo Metal Tube flow transmitter MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.

MCF series are now used in the computer-controlled flow system.

The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.

The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.

Liquid Flow Switch Flo-Gard II
Quick view
RCM

Liquid Flow Switch Flo-Gard II

RCM general purpose Flo-Gard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow. 

Our reed switches can also be ordered for use in hazardous location (Option IS),  when fitted with

LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point  and makes field calibration easy.

Water Flowmeter
Quick view
Ryutai Kogyo

Water Flowmeter

Ryutai Kogyo Model ADF is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of water with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.

Ryutai Kogyo Metal Tube Flowmeter GTF ATF
Quick view
Ryutai Kogyo

Metal Tube Flowmeter GTF ATF

Ryutai Kogyo Model GTF and ATF is widely used for its high quality and ease of use. This flow meter is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of liquid or gas with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.l There are widely used for its high quality and ease of use

Flow Sensor ND
Quick view
Aichi Tokei

Flow Sensor

Aichi Tokei ND Flowsensor is ideal for measuring variety of fluid and outputs open collector pulses with the built-in amplifier type magnetic sensor.

Features

  • Highly accurate over a wide measurement range
  • Simple and durable structure
  • Compact and lightweight (eg. ND10: 120g)
  • Compatible with various kinds of fluids
  • Free installation position (except the position that of the holding plate is faced downward.)
  • Excellent cost-performance
  • High sensitive high-density pulse output
Flowmeter for Small Flow
Quick view
Ryutai Kogyo

Flowmeter for Small Flow

Purge meters are variable area flowmeters that used to measure small flowrates.
It is suitable for liquid, gas, oil and compressed air.
Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.
It comes with stainless steel float and a metering a valve.

Kent Helix Water Flowmeter
Quick view
Others

Positive Displacement Flowmeter for Water 4000

Elster Kent Helix Woltmann cold water meter can be installed in horizontal, vertical or inclined pipelines without loss of accuracy. This meter not only conforms to relevant BS, ISO and EEC standards, but offers user benefits which greatly exceed these specifications.

Positive Displacement Oil Flowmeter
Quick view
Tokico

Positive Displacement Oil Flowmeter

TOKICO FLOWMETER, TOKICO OIL FLOWMETER is a high accuracy displacement type flow meter composed of two roots and measures flow directly. Tokico Oil Flowmeter has little deterioration in the instrument accuracy because a couple of roots rotates with non-contact. This flow meter measures with high accuracy and wide flow range.

Pitot Cell Flowmeter
Quick view
Ryutai Kogyo

Pitot Cell Flowmeter

Ryutai Kogyo Pitot Cell Flowmeter is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min