Dickson Chart Paper

The EDL CRYO-CAL-2 cryostat provides a low-temperature environment for comparison calibration of temperature sensors. Liquid nitrogen supplies the cooling, with a standard block accommodating up to four sensors.

• Temperature range: -196 to 0°C.
• Cooling: Liquid nitrogen, without a compressor refrigeration system.
• Sensor arrangement: Four wells with tubes and spacer options.
• Current manufacturer designation: CRYO-CAL-2-LI; confirm configuration when ordering.

The Anritsu AP-400 and AP-450 printing thermometers produce temperature records directly at the measurement point. Use manual printing for inspection rounds or interval printing to follow temperature changes.

• Built-in printer: Print readings with time information.
• Memory: Store up to 100 readings for batch printing.
• Model choice: AP-400 with ASP connector or AP-450 with ANP connector.
• Probe selection: Match the fixed thermocouple type and connector; probes are sold separately.

Monnit ALTA Wireless Humidity (RH) Sensor allows you to accurately monitor the relative humidity of the air within a room or enclosure. - Measures relative humidity, temp

The Isuzu TH27R (TH-27R) thermohygrograph is discontinued. For a replacement temperature and humidity chart recorder, choose the Sato NSII-Q (Sigma II).

• Replacement options: Sato 7210-00 or 7211-00, depending on the temperature range required.
• Paper recording: Records temperature and relative humidity on a rotating chart.
• Before ordering: Confirm the recording period and matching chart paper.

View the Sato NSII-Q replacement

The KOFLOC 6800 series regulates pressure on the upstream side of a gas system by releasing gas when pressure exceeds the selected setting. Its compact design suits panel-mounted equipment and tank pressure control.

• Pressure settings: 0.01–0.3 or 0.01–0.6 MPa(G), depending on model.
• Maximum exhaust flow: 0.8, 1 or 10 L/min, depending on model and operating conditions.
• Connections: Rc 1/4 or Rc 1/8.
• Selection: Four versions with material options to suit the gas.

The Dickson TWP touchscreen data logger displays readings and measurement history on an 8-inch colour screen. Configure it for temperature, humidity or differential pressure monitoring using compatible replaceable sensors.

• Local monitoring: Touchscreen display with audible and visual alarms.
• Data access: USB download and Wi-Fi/Ethernet connectivity.
• Remote monitoring: DicksonOne cloud access and notification features require the appropriate subscription.

The Anritsu FL Series fiber optic thermometers measure temperature in microwave, high-frequency and high-voltage environments where conventional electrical sensors can be difficult to use.

• Model options: FL-2000 with one channel or FL-2400 with four channels.
• Probe selection: Dedicated fiber optic probes for different temperatures, materials and operating conditions.
• Integration: Analog temperature output and RS-232C communication.
• Configuration: Temperature probes are selected separately and are not included with the instrument.

Check surface temperatures without contact using the Sato SK-8950 infrared thermometer. Its circular laser marker helps position the measurement, while IP54 protection supports handling with wet hands.

• Wide measuring range: -60 to 550°C with 0.1°C resolution.
• Adjustable emissivity: 0.10 to 1.00 for different surface materials.
• Practical inspection functions: MAX, MIN, average, temperature difference and high/low alarms.

Monitor outdoor wind conditions with the Sato WVAT6D0-3-00 digital wind speed and direction indicator and matching W639-ED1 sensor. The system provides a local display and configurable alarms for site monitoring.

• Wind measurement: Sensor range of 2 to 90 m/s and 0 to 360°.
• Display: Instantaneous and mean wind speed, with 16-point wind direction indication.
• Alerts: Configurable wind alarms with contact, light and audible notification.
• System selection: Specify the indicator, sensor, cable and required output options together.

Anritsu U series probes offer minimal coefficient of friction between the sensor and measuring surface, making them ideal for measuring the temperatures of moving or rotating surfaces.Specific components may be combined to customize products for the needs of a customer's specific application.

The Elster Kent H4000 Woltmann water meter measures accumulated cold water consumption for commercial, industrial and water distribution applications.

• Measurement: Bulk cold water metering with a totalising register.
• Sizes listed: DN50, DN80, DN100, DN150 and DN200.
• Operating limits: Water temperature up to 50°C and working pressure up to 16 bar.
• Installation: Suitable for horizontal, vertical or inclined pipelines, subject to installation requirements.

The Evikon E2218-DM duct humidity and temperature transmitter measures air conditions inside ventilation ducts and provides calculated dew point and absolute humidity values.

• Duct installation: 200 mm insertion probe.
• Analog signals: Two configurable outputs, selectable as 4–20 mA or 0–10 V.
• Digital communication: RS485 Modbus RTU.
• Protection: IP65-rated transmitter enclosure.

Sato Digital Thermohygrometer PC-5400TRH is easy to read current temperature and humidity from a distance with large LCD (character height: 40mm) . Each min./max. value of temperature and humidity are simultaneously displayed. Alarm setting is available (buzzer sound and LED)

Measure wind speed for a connected monitoring system with the Sato 7980-S-13 three-cup wind speed sensor. Built-in signal conversion and linearisation provide an analogue output proportional to wind speed.

• Measurement: Three-cup anemometer with AC generator sensing.
• Standard output: 0–1 V DC for connection to a compatible indicator or recording system.
• Optional configuration: 4–20 mA output, subject to confirmation.
• System selection: Confirm the measuring range, power supply, cable and receiving instrument before ordering.

Reveal contact pressure and uneven loading with FUJIFILM Prescale pressure measurement film. The film develops a red impression where pressure is applied, helping you inspect the contact pattern between mating surfaces.

• Pressure range: Nine standard grades covering 0.006–300 MPa.
• Applications: Roller contact, press platens, clamping, assembly and gasket contact checks.
• Film construction: Two-sheet and mono-sheet types, depending on the selected grade.
• Selection: Choose according to expected contact pressure, temperature, humidity and loading duration.

Anritsu MG Series Magnetic Probe are temperature sensors designed for stationary surfaces.
Built-in magnets allow these probes to be attached to measurement targets. Specific components may be combined to customize products for the needs of a customer's specific application.