Sato SK-270WP-K is a simple operation waterproof digital thermometer.
Ideal for plants, laboratories, food factories and like that are required temperature management at the site using water.
Evikon Humidity and Temperature Transmitter (Duct Mount)
:
Evikon Humidity and temperature transmitter E2218-DM is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point value in air with high accuracy and stability in non-aggressive gases.
Evikon E2218-DM features two freely configurable analog outputs 4-20 mA / 0-10 V and RS485 Modbus RTU interface for direct Fieldbus networking. The sensors are located at the tip of 200 mm long stem, intended for insertion into ventilation airducts.
  Features
DescriptionHumidity and temperature transmitter E2218-DM is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point value in air with high accuracy and stability in non-aggressive gases. E2218-DM features two freely configurable analog outputs 4-20 mA / 0-10 V and RS485 Modbus RTU interface for direct Fieldbus networking. The sensors are located at the tip of 200 mm long stem, intended for insertion into ventilation airducts. Technical Data
|
|
Download |
Evikon Humidity and temperature transmitter E2218-DM is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point value in air with high accuracy and stability in non-aggressive gases.
Evikon E2218-DM features two freely configurable analog outputs 4-20 mA / 0-10 V and RS485 Modbus RTU interface for direct Fieldbus networking. The sensors are located at the tip of 200 mm long stem, intended for insertion into ventilation airducts.
16 other products in the same category:
Sato SK-RHC-1 Temperature Transmitter is electric current 4 to 20mA output type in the SK-RHC series temperature/humidity transmitters.
3 types of probe are provided for SK-RHC series transmitters.
Select the suitable probe to your usage.
AC adapter is available at option.
(The probe shown in the photo is the plug-in type)
Ryutai Kogyo Pitot Cell Flowmeter is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min
Anritsu HHT series probe are high-durability temperature sensors designed to measure high-temperature surfaces.
Specific components may be combined to customize products for the needs of a customer's specific application.
Dickson OCEAView™ cloud monitoring solution is a unified platform based on three key pillars: monitoring, traceability, and alerts. Dickson Environmental Monitoring System, Dickson EMS is designed for fixed monitoring, mobility, and connectivity, OCEAView™ integrates a wide range of advanced data loggers and wireless sensors to help you stay on top of your critical environments and monitor your sensitive products continually.
RCM Direct Reading Differential Pressure Flowmeter for Liquid & Gas
The Wahl DP Series Differential Pressure Transducers / Transmitters are extremely reliable, small and lightweight piezoresistive pressure sensors in a compact, rugged, all 304 stainless steel housing and sensor, rated at IP67.
Appropriate for harsh environments, outdoor monitoring or in applications where dust and particulate matter may exist, they utilize silicon sensors resistant to shock, vibration, EMI/RFI and wide temperature variations.
Anritsu Temperature Datalogger Model AM-8000 series thermometers are compact handheld units that store measurement data in memory.
Data held in memory can then be transferred to a PC via dedicated software for later analysis or other use.
Anritsu ACSⅡ series products are temperature calibration systems for surface temperature and internal temperature measuring devices.
Temperatures can be set across a wide range, from room temperature to 500°C. These calibration systems are designed for calibration or to check temperature measuring probes.
Aichi Tokei's governors are actively working at various locations for energy-saving, labor-saving on energy control, and providing safe supply of gas.
The ones introduced here are Aichi Tokei's standard governors.
•Governor for high temperature gas
•Governor with the precise adjustment handle
•Governor for gas that contains sulfide
•Other special governors
Sato Datalogger SK-L200THIIa for temperature and humidity measurements.
CD-ROM for data analysis software and real-time transmission software is attached as accessories.
CD-ROM for data analysis software and real-time transmission software is attached as accessories.
Logged data can be easily displayed and analized on a PC using the software.
Three types of probes are sold separately.
Three types of probes are sold separately.
The Wahl SS Series Silicon Pressure Transducers / Transmitters are extremely reliable, small and lightweight piezoresistive pressure sensors in a compact, rugged, all 304 stainless steel housing and sensor, rated at IP67.
The Wahl CS Series Ceramic Pressure Transducers / Transmitters utilize a ceramic pressure measurement sensor that is highly resistant to corrosion and chemicals. These sensors are extremely reliable, small and lightweight piezoresistive pressure sensors in a compact, rugged, all 304 stainless steel body, rated at IP67.
Anritsu BT series probes feature needle tips that can be inserted into semi-solid materials. Needle tips for models with replaceable tips can be purchased separately. Specific components may be combined to customize products for the needs of a customer's specific application
If gases escape through leaks in piping systems (e.g. untight screwed connections, corrosions and so on) ultrasonic noises are generated. By means of LD 400 even the smallest leakages which cannot be heard by the human ear can be detected even from distances of several meters. LD 400 transforms the inaudible signals into a frequency which can be identified. By means of the comfortable sound-proof headset these noises can be realized even in extremely noisy environments.
Due to a particularly designed acoustic trumpet a better focusing of the acoustic waves is achieved. This acoustic trumpet acts like a directional microphone while interfering ambient noises are cushioned and the accurate localization of the leakages is eased even in areas which are difficult to access.
Sato Digital Thermohygrometer PC-5400TRH is easy to read current temperature and humidity from a distance with large LCD (character height: 40mm) . Each min./max. value of temperature and humidity are simultaneously displayed. Alarm setting is available (buzzer sound and LED)