Explore Evikon transmitters for gas concentration, temperature, humidity and differential pressure. Select sensors, mounting arrangements and output signals for connection to compatible controllers, building management and monitoring systems.
Evikon transmitters convert gas concentration, temperature, humidity and differential pressure measurements into signals for monitoring and control equipment. SL Measurement supplies options for duct measurement, room conditions and gas monitoring.
Select the transmitter around the measurement range, sensor location and receiving system. Confirm the required analogue signal or digital interface before choosing a configuration.
For ventilation ducts, position the sensor where it can measure representative air conditions. Check the available insertion space, access for maintenance and the possibility of condensation.
Specify the required parameter and scale for each output. The sensor is intended for air and non-aggressive gases under the stated operating conditions.
Choose the mounting arrangement to suit the measurement location. Wall-mounted and duct-mounted instruments place the sensing element differently, so the installation must be considered alongside the measurement range.
Room pressure, ventilation and filter monitoring involve measuring the difference between two pressure points. Select a range that covers normal operation and expected pressure changes.
Include the normal pressure difference, required measurement direction and tubing arrangement in your enquiry. Check both the range and accuracy against the pressure limits being monitored.
Gas transmitters must be selected for the specific gas and concentration range. Identify the gas by name, including the refrigerant designation where applicable, and describe the installation environment.
Attached and remote sensor options allow different installation arrangements. Confirm the sensor configuration, output signals and any required alarm or control functions for the complete system.
Check the transmitter specification against the receiving equipment before ordering. Output availability and wiring requirements differ between models.
For replacement enquiries, send the full transmitter code, sensor reference and a photograph of the wiring terminals. Include the configured range and the model of the receiving controller or monitoring system.
For remote sensors, specify the existing cable length and connection arrangement. Compatibility should be checked against the exact transmitter and sensor combination.
Send the measurement parameter, required range, mounting arrangement, output signal and quantity. For gas applications, include the target gas and expected concentration. For duct or room monitoring, describe the measurement location and operating conditions.
Contact us for pricing and availability.
There are 4 products.
The Evikon E2218-DM duct humidity and temperature transmitter measures air conditions inside ventilation ducts and provides calculated dew point and absolute humidity values.
The Evikon E2244 humidity and temperature transmitter measures relative humidity and air temperature for connection to controllers, monitoring instruments and building management systems.
The Evikon E2418-DF differential pressure transmitter measures small pressure differences in dry, clean air. Connect it to a compatible building management system, PLC or monitoring system for HVAC and room pressure applications.
Evikon Gas Transmitter E2618 series is intended for measurement of gases with high accuracy
Features:
- Industrial enclosure with IP65 protection
- Attached or remote sensor options
- Two analog outputs settable to 4-20 mA or 0-10 V
- RS485 Modbus RTU digital interface
- Power supply 12...36 VDC (default), 24 VAC as option
