Temperature & Humidity

Anritsu CR Series temperature probes for checking the tip temperature of soldering irons.

• Temperature range: 0°C to 500°C.
• Tip sizes: Below Ø1.5 mm or Ø1.5 to Ø4 mm.
• Thermocouple: Type K or Type E.
• Response time: Approx. 5 seconds.

Anritsu BR Series flexible low-temperature probes for measuring air, liquids and semi-solid materials in cold and controlled environments.

• Temperature range: -100°C to 200°C.
• Thermocouple: Type K or Type E.
• Response time: Approx. 1.5 seconds.
• Configuration: Select thermocouple length, tape length, cable and connector.

Anritsu SX Series high-accuracy surface temperature probes with a flexible contact-support head for stable measurement on stationary surfaces.

• Temperature range: -50°C to 300°C or -50°C to 800°C.
• Flexible head: ±4° movement for improved surface contact.
• Response: 1 second to 99% response.
• Thermocouple: Type K or Type E.

Anritsu HHT Series high-durability surface temperature probes for direct contact measurement of hot metal and industrial surfaces.

• HHT-4* Series: -50°C to 800°C.
• HHT-5* Series: 300°C to 1100°C.
• Thermocouple: Type K.
• Pipe forms: Straight, 45° and 90°.

Anritsu VA Series clip-type surface temperature probes for measuring the temperature of small heat pipes and cylindrical surfaces.

• Heat pipe sizes: Ø3, Ø4, Ø5 and Ø6 mm.
• Temperature range: -50°C to 300°C.
• Thermocouple: Type K or Type E.
• Response time: Approx. 2 seconds.

Anritsu BC Series needle probes for measuring the internal temperature of food, liquids and semi-solid materials.

• Waterproof: IPX5 construction for washing under running water.
• Temperature range: Up to -200°C to 300°C depending on model.
• Thermocouple: Type K or Type E.
• Configuration: Select probe diameter, length, coating, cable and connector.

Anritsu UX Series flexible-head temperature probes for measuring moving and rotating surfaces with stable contact during measurement.

• Temperature range: Up to -50°C to 250°C depending on configuration.
• Surface speed: Up to 24 km/h or 36 km/h depending on head size.
• Thermocouple: Type K or Type E.
• Head movement: 360° movement with contact-support function.

EDL SBB Single Black Body infrared calibrators for checking handheld and installed IR thermometers and pyrometers.

• Models: SBB-1, SBB-2 and SBB-3.
• Temperature coverage: -30°C to 650°C across the series.
• Target: 2" diameter black body with 0.986 emissivity.
• Use: Laboratory, quality control and field calibration of infrared instruments.

EDL Practi-Cal PRI portable dry well and surface calibrator for checking insertion and contact temperature sensors.

• Models: PRI-1 and PRI-2.
• Temperature range: Ambient to 350°C or 650°C.
• Calibration: Interchangeable blocks for insertion and surface probes.
• Portable: Compact design for laboratory and field use.

The EDL CRYO-CAL-2 cryostat provides a low-temperature environment for comparison calibration of temperature sensors. Liquid nitrogen supplies the cooling, with a standard block accommodating up to four sensors.

• Temperature range: -196 to 0°C.
• Cooling: Liquid nitrogen, without a compressor refrigeration system.
• Sensor arrangement: Four wells with tubes and spacer options.
• Current manufacturer designation: CRYO-CAL-2-LI; confirm configuration when ordering.

EDL Ultra Bath stirred liquid temperature calibrators for stable comparison calibration of thermometers and temperature probes.

• Models: UB-4010, UB-1020 and UB-2050.
• Temperature coverage: -40°C to 550°C across the series.
• Bath capacity: 42 litres with an 18" deep tank.
• Suitable for: RTDs, PRTs, SPRTs, thermometers and insertion temperature probes.

The Dickson TWP touchscreen data logger displays readings and measurement history on an 8-inch colour screen. Configure it for temperature, humidity or differential pressure monitoring using compatible replaceable sensors.

• Local monitoring: Touchscreen display with audible and visual alarms.
• Data access: USB download and Wi-Fi/Ethernet connectivity.
• Remote monitoring: DicksonOne cloud access and notification features require the appropriate subscription.