Anritsu Soldering Iron Probe CR Series is a temperature probes for the tips of soldering irons. Select the probe type best-suited to the diameter of your soldering iron tip.
Moving Wire Probe MW Series
:
Anritsu MW series probes are ideal for measuring the temperatures at the surface of moving wires. Specific components may be combined to customize products for the needs of a customer's specific application.
Type E Model : MW-31E-TC1-ANP
|
|
Type E Model : MW-32E-TC1-ANP
|
|
Type E Model : MW-33E-TC1-ANP
|
|
Type E Model : MW-44E-TC1-ANP
|
|
Type E Model : MW-45E-TC1-ANP
|
|
Type E Model : MW-46E-TC1-ANP
|
|
Model number*1 | MW-3* | MW-4* | |
Thermocouple type | Type E or K | ||
Temp. range*2 | -50 to 250°C | ||
Tolerance*3 | 0°C ≦ t ≦ 200°C | ±2.5°C | ±2.5°C |
200°C < t ≦ 250°C | ±3.0°C | ±3.0°C | |
Response time*4 | 5s | ||
Durability*5 | S(Can not evaluate because of special-application) | ||
Roller material | Teflon | ||
Guard material | Teflon | ||
Roller setting plate material | Stainless(SUS304) | ||
Pipe material | Stainless(SUS316) | ||
Grip material | Polyacetal | ||
Repair*6 | Repairable |
*1 The asterisk (*) is replaced by the number of the model name you selected. The model number after thermocouple type is omitted. *2 The operating temperature limit is determined by the allowable temperature limit of the sensor head contacts the measurement target. Note that the operatingtemperature limit is not the same as the allowable temperature limits of the grip, cable, and plug. *3 Tolerance is available at 0°C or above within the operating temperature on a stationary flat and smooth metal surface. *4 The response time is the time required to detect 99% of the true value on a flat and smooth metal surface. *5 Can not evaluate because of special-application *6 Please refer to page repair. |
Available models: |
MW-11K MW-12K MW-13K MW-24K MW-25K MW-26K |