There are 37 products.

Active filters

  • Brand: Aichi Tokei
  • Brand: Anritsu
  • Brand: Evikon
  • Brand: Isuzu
  • Brand: Newsteo

Anritsu AM-9000 Data collector is a high-speed multi-point data recorder containing a precision, high-speed A/D converter, a C-MOS microprocessor and large capacity memory. Multipurpose system upgrades are possible through communication with external devices through the RS-232C interface. many functions are concentrated in the compact unit and various temperature measurement regions are approached. It many collect data from as many as 12 channels!

This model is successor of Anritsu AM-8000 Series Temperature Datalogger

Anritsu Thermometer HR series handheld thermometers featuring high accuracy, reliability and ease of use.
These general-purpose thermometers can be used for on-site temperature measurement and various other applications

Evikon Differential Pressure Transmitter E2618-DF is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of low pressure of air and non-aggressive gases in HVAC applications.

Evikon Humidity and temperature transmitter E2218-DM is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point value in air with high accuracy and stability in non-aggressive gases. 



Evikon E2218-DM features two freely configurable analog outputs 4-20 mA / 0-10 V and RS485 Modbus RTU interface for direct Fieldbus networking. The sensors are located at the tip of 200 mm long stem, intended for insertion into ventilation airducts.

Anritsu FL Series can measure temperatures in environments subject to high-frequency waves, microwaves, or high voltages-areas where electric thermometers such as thermocouples, platinum resistance temperature detectors, and thermistors are typically ineffective.
・Capable of measurements in environments subject to high-frequency waves or high voltages.
・A fiber optic thermometer offering a wide measurement range.
・Analog output capability allows use for machine temperature control.
・Measurement data can be imported into a PC using software* bundles with the thermometer.
* for Microsoft® Windows® 7, Windows® 8.1, Windows® 10 (for English)

Anritsu Fine Flexible Internal Probe SF series probes are flexible internal temperature sensors featuring extra-fine thermocouple wires covered with a Teflon-coated sheath.

Specific components may be combined to customize products for the needs of a customer's specific application

Anritsu Flat Leaf Probe ST series probes are multi-purpose temperature sensors featuring a flexible tape shape. They can be glued to the surfaces of measurement targets for use in a range of applications.

Anritsu Flat Leaf Probe STN series probes are multi-purpose temperature sensors featuring a flexible tape shape. They can be glued to the surfaces of measurement targets for use in a range of applications.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu ST series probes are multi-purpose temperature sensors featuring a flexible tape shape. They can be glued to the surfaces of measurement targets for use in a range of applications. Specific components may be combined to customize products for the needs of a customer's specific application.

Aichi Tokei's governors are actively working at various locations for energy-saving, labor-saving on energy control, and providing safe supply of gas.
The ones introduced here are Aichi Tokei's standard governors.


•Governor for high temperature gas
•Governor with the precise adjustment handle
•Governor for gas that contains sulfide
•Other special governors

Aichi Tokei ND Flowsensor is ideal for measuring variety of fluid and outputs open collector pulses with the built-in amplifier type magnetic sensor.

Features

  • Highly accurate over a wide measurement range
  • Simple and durable structure
  • Compact and lightweight (eg. ND10: 120g)
  • Compatible with various kinds of fluids
  • Free installation position (except the position that of the holding plate is faced downward.)
  • Excellent cost-performance
  • High sensitive high-density pulse output

Anritsu BT series probes feature needle tips that can be inserted into semi-solid materials. Needle tips for models with replaceable tips can be purchased separately. Specific components may be combined to customize products for the needs of a customer's specific application

Support function of contact with tolerance slope range of ±4 degrees" added to the most accurate Anritsu High Superior Surface Probe with Flexible Head SX Series

The flexible head allows the temperature sensing part follows and closely contacts the object to be measured, and it's possible to high accurate measure more easily.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu HHT series probe are high-durability temperature sensors designed to measure high-temperature surfaces.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu Low Temperature Probe BR Series probes are ideal for measuring temperature inside of freezer, refrigerator, incubator or drying oven. 

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu MG Series Magnetic Probe are temperature sensors designed for stationary surfaces.
Built-in magnets allow these probes to be attached to measurement targets. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu CS series probes are small surface temperature sensors designed to measure the temperature of stationary surface.Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu U series probes offer minimal coefficient of friction between the sensor and measuring surface, making them ideal for measuring the temperatures of moving or rotating surfaces.Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu MW series probes are ideal for measuring the temperatures at the surface of moving wires. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu BS series probes are internal temperature sensors designed to measure the temperatures of liquid or semi-solid materials. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu BC series probes are internal temperature probes designed to measure the center temperature of food, liquid or semi-solid materials.It is waterproof (IPX5) and can be washed with running water, so you can use it cleanly and hygienically.In order to prevent contamination, the probes designed to prevent the parts falling off.

Depending on the application, it is possible to combine the outside diameter, length, presence of coating of the protective pipe and plug shape.

Anritsu UX series is temperature probes suitable for measuring the temperature of moving or rotating surfaces.

Since it has a contact support function, it does not easily shake even if it comes into contact with a moving object, and it is easy to adhere to the object to be measured.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu WE series probes are temperature sensors designed for stationary surfaces. These self-supporting probes can be used to measure temperaturesimply by placing the probe on the measurement target.

Specific components may be combined to customize products for the needs of a customer's specific application.

The Tempmate S1 USB temperature data logger is perfectly adapted to the cold chain applications in the food industry (storage and transport ), but also for monitoring for all types of goods: pharmaceuticals, blood, transportation of works of art, flowers, paper, …

Anritsu A series probes are general-purpose temperature sensors designed to measure the temperatures of stationary surfaces.
Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu AX series are the ultimate sensor for the surface temperature measurement: A series, and enhanced it by fitting it with Flexible head. They are the best suitable for any applications based on philosophy of "Simple is the best" and suit to any of your request.

Anritsu ACSⅡ series products are temperature calibration systems for surface temperature and internal temperature measuring devices.
Temperatures can be set across a wide range, from room temperature to 500°C. These calibration systems are designed for calibration or to check temperature measuring probes.

Newsteo offers a range of temperature recorders (or data loggers) that allow:



  • measuring temperature,
  • recording this measurement or transmitting in real time to a supervision center,
  • displaying the measurement on a PC, tablet, smart phone …

Radio recorders offered by Newsteo are standalone recorders, battery-powered and easily movable. Their compact design allows them to be easily used for real-time monitoring