Anritsu Temperature Datalogger Model AM-8000 series thermometers are compact handheld units that store measurement data in memory.
Data held in memory can then be transferred to a PC via dedicated software for later analysis or other use.

Anritsu AM-9000 Data collector is a high-speed multi-point data recorder containing a precision, high-speed A/D converter, a C-MOS microprocessor and large capacity memory. Multipurpose system upgrades are possible through communication with external devices through the RS-232C interface. many functions are concentrated in the compact unit and various temperature measurement regions are approached. It many collect data from as many as 12 channels!

This model is successor of Anritsu AM-8000 Series Temperature Datalogger

The Kofloc 6800 backpressure valve is a kind of relief valve that keeps the pressure at the front stage of a valve constant. It can easily and quickly control the pressure of a tank with a large buffer and remove the constant fl ow of a mixed gas, which cannot easily be done by general regulation valves with a subsequent stage controlling function. This new concept of pressure regulation has been attracting much attention.

Applications
• Tank pressure control
• Constant flow control of mixed gas

Anritsu VA series probes are clip type surface temperature probes to measure temperature of a heat pipe.

Specific components may be combined to customize products the needs of a customer's specific application.

RCM Direct Reading Differential Pressure Flowmeter for Liquid & Gas

Sekonic Digital Thermohygrograph ST50A Displays and records temperature and humidity simultaneously.With an electronic sensor of excellent responsiveness

Sekonic Digital Thermohygrograph ST50M with memory card recording.

It records on chart paper and/or memory card. The data is ready to export to Excel (.csv) format.

Anritsu Thermometer HD series handheld thermometers allow easy temperature measurement.
These general-purpose thermometers can be used for on-site temperature measurement and various other applications.

Anritsu Thermometer HR series handheld thermometers featuring high accuracy, reliability and ease of use.
These general-purpose thermometers can be used for on-site temperature measurement and various other applications

Anritsu FL Series can measure temperatures in environments subject to high-frequency waves, microwaves, or high voltages-areas where electric thermometers such as thermocouples, platinum resistance temperature detectors, and thermistors are typically ineffective.
・Capable of measurements in environments subject to high-frequency waves or high voltages.
・A fiber optic thermometer offering a wide measurement range.
・Analog output capability allows use for machine temperature control.
・Measurement data can be imported into a PC using software* bundles with the thermometer.
* for Microsoft® Windows® 7, Windows® 8.1, Windows® 10 (for English)

Anritsu Fine Flexible Internal Probe SF series probes are flexible internal temperature sensors featuring extra-fine thermocouple wires covered with a Teflon-coated sheath.

Specific components may be combined to customize products for the needs of a customer's specific application

Anritsu Flat Leaf Probe ST series probes are multi-purpose temperature sensors featuring a flexible tape shape. They can be glued to the surfaces of measurement targets for use in a range of applications.

Anritsu Flat Leaf Probe STN series probes are multi-purpose temperature sensors featuring a flexible tape shape. They can be glued to the surfaces of measurement targets for use in a range of applications.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu ST series probes are multi-purpose temperature sensors featuring a flexible tape shape. They can be glued to the surfaces of measurement targets for use in a range of applications. Specific components may be combined to customize products for the needs of a customer's specific application.

Aichi Tokei's governors are actively working at various locations for energy-saving, labor-saving on energy control, and providing safe supply of gas.
The ones introduced here are Aichi Tokei's standard governors.


•Governor for high temperature gas
•Governor with the precise adjustment handle
•Governor for gas that contains sulfide
•Other special governors

Aichi Tokei ND Flowsensor is ideal for measuring variety of fluid and outputs open collector pulses with the built-in amplifier type magnetic sensor.

Features

• Highly accurate over a wide measurement range
• Simple and durable structure
• Compact and lightweight (eg. ND10: 120g)
• Compatible with various kinds of fluids
• Free installation position (except the position that of the holding plate is faced downward.)
• Excellent cost-performance
• High sensitive high-density pulse output

Purge meters are variable area flowmeters that used to measure small flowrates.
It is suitable for liquid, gas, oil and compressed air.
Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.
It comes with stainless steel float and a metering a valve.

Anritsu BT series probes feature needle tips that can be inserted into semi-solid materials. Needle tips for models with replaceable tips can be purchased separately. Specific components may be combined to customize products for the needs of a customer's specific application

Support function of contact with tolerance slope range of ±4 degrees" added to the most accurate Anritsu High Superior Surface Probe with Flexible Head SX Series

The flexible head allows the temperature sensing part follows and closely contacts the object to be measured, and it's possible to high accurate measure more easily.

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu HHT series probe are high-durability temperature sensors designed to measure high-temperature surfaces.

Specific components may be combined to customize products for the needs of a customer's specific application.

Original Isuzu Chart Papers
Packing:
- Weekly 55 sheets/pk
- Monthly 15 sheets/pk

RCM general purpose Flo-Gard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow. 

Our reed switches can also be ordered for use in hazardous location (Option IS),  when fitted with

LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point  and makes field calibration easy.

Anritsu Low Temperature Probe BR Series probes are ideal for measuring temperature inside of freezer, refrigerator, incubator or drying oven. 

Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu MG Series Magnetic Probe are temperature sensors designed for stationary surfaces.
Built-in magnets allow these probes to be attached to measurement targets. Specific components may be combined to customize products for the needs of a customer's specific application.

Ryutai Kogyo Metal Tube flow transmitter MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.

MCF series are now used in the computer-controlled flow system.

The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.

The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.

Ryutai Kogyo Model GTF and ATF is widely used for its high quality and ease of use. This flow meter is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of liquid or gas with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.l There are widely used for its high quality and ease of use

Anritsu CS series probes are small surface temperature sensors designed to measure the temperature of stationary surface.Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu U series probes offer minimal coefficient of friction between the sensor and measuring surface, making them ideal for measuring the temperatures of moving or rotating surfaces.Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu MW series probes are ideal for measuring the temperatures at the surface of moving wires. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu BS series probes are internal temperature sensors designed to measure the temperatures of liquid or semi-solid materials. Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu BC series probes are internal temperature probes designed to measure the center temperature of food, liquid or semi-solid materials.It is waterproof (IPX5) and can be washed with running water, so you can use it cleanly and hygienically.In order to prevent contamination, the probes designed to prevent the parts falling off.

Depending on the application, it is possible to combine the outside diameter, length, presence of coating of the protective pipe and plug shape.

Anritsu AR-6500 series infrared thermometers are capable of non-contact temperature measurement and come with contact type thermometer functions

Ryutai Kogyo Pitot Cell Flowmeter is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min

Compact, self contained Kofloc Mass Flow Meters are designed to read flow rates of gases. The rugged design coupled with instrumentation grade accuracy provides versatile and economical means of flow control.

Anritsu UX series is temperature probes suitable for measuring the temperature of moving or rotating surfaces.

Since it has a contact support function, it does not easily shake even if it comes into contact with a moving object, and it is easy to adhere to the object to be measured.

Specific components may be combined to customize products for the needs of a customer's specific application.

Sekonic C-7000 Handheld spectrometer, designed especially for industrial use.

Main Measurement & Function

• Illuminance ★- 1 to 200,000lx in ambient / 20 to 20,500lx・ s in flash
• Color temperature ★ - 1,563 K to 100,000 K
• Color rendering index - CRI (Ra, R1 to R15, comparison), TM-30 (Rf, Rg), SSI, TLCI/TLMF
• Spectrum analysis : 380nm to 780nm
• PPFD (photosynthesis photon flux density)
• Chromaticity coordinates indication
• Continuous / Single measurement selection

Sekonic Universal 6 channel Recorder SP-100 / SP100 records from different sources simultaneously, including mA, V, PT100, Thermocouple.

Anritsu WE series probes are temperature sensors designed for stationary surfaces. These self-supporting probes can be used to measure temperaturesimply by placing the probe on the measurement target.

Specific components may be combined to customize products for the needs of a customer's specific application.

The Tempmate S1 USB temperature data logger is perfectly adapted to the cold chain applications in the food industry (storage and transport ), but also for monitoring for all types of goods: pharmaceuticals, blood, transportation of works of art, flowers, paper, …

Anritsu Soldering Iron Probe CR Series is a temperature probes for the tips of soldering irons. Select the probe type best-suited to the diameter of your soldering iron tip.

Anritsu A series probes are general-purpose temperature sensors designed to measure the temperatures of stationary surfaces.
Specific components may be combined to customize products for the needs of a customer's specific application.

Anritsu AX series are the ultimate sensor for the surface temperature measurement: A series, and enhanced it by fitting it with Flexible head. They are the best suitable for any applications based on philosophy of "Simple is the best" and suit to any of your request.

Anritsu ACSⅡ series products are temperature calibration systems for surface temperature and internal temperature measuring devices.
Temperatures can be set across a wide range, from room temperature to 500°C. These calibration systems are designed for calibration or to check temperature measuring probes.

Isuzu Thermohygrograph TH27R TH-27R

Anritsu Thermometer with Printing Model AP-400 series thermometers have built-in printers for on-the-spot printing of measurement data.

AP-450, AP400 is replacement of AP-800 (AP-800K, AP-800E, AP-850K, AP-850E) series

Ryutai Kogyo Model ADF is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of water with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.

Newsteo offers a range of temperature recorders (or data loggers) that allow:

• measuring temperature,
• recording this measurement or transmitting in real time to a supervision center,
• displaying the measurement on a PC, tablet, smart phone …

Radio recorders offered by Newsteo are standalone recorders, battery-powered and easily movable. Their compact design allows them to be easily used for real-time monitoring