RCM Direct Reading Differential Pressure Flowmeter for Liquid & Gas
Sekonic Spectrometer C-7000
:
Sekonic C-7000 Handheld spectrometer, designed especially for industrial use.
Main Measurement & Function
- Illuminance ★- 1 to 200,000lx in ambient / 20 to 20,500lx・ s in flash
- Color temperature ★ - 1,563 K to 100,000 K
- Color rendering index - CRI (Ra, R1 to R15, comparison), TM-30 (Rf, Rg), SSI, TLCI/TLMF
- Spectrum analysis : 380nm to 780nm
- PPFD (photosynthesis photon flux density)
- Chromaticity coordinates indication
- Continuous / Single measurement selection
Sekonic C-7000 Handheld spectrometer, designed especially for industrial use.
Main Measurement & Function
- Illuminance ★- 1 to 200,000lx in ambient / 20 to 20,500lx・ s in flash
- Color temperature ★ - 1,563 K to 100,000 K
- Color rendering index - CRI (Ra, R1 to R15, comparison), TM-30 (Rf, Rg), SSI, TLCI/TLMF
- Spectrum analysis : 380nm to 780nm
- PPFD (photosynthesis photon flux density)
- Chromaticity coordinates indication
- Continuous / Single measurement selection
16 other products in the same category:
Compact, self contained Kofloc Mass Flow Meters are designed to read flow rates of gases. The rugged design coupled with instrumentation grade accuracy provides versatile and economical means of flow control.
Support function of contact with tolerance slope range of ±4 degrees" added to the most accurate Anritsu High Superior Surface Probe with Flexible Head SX Series
The flexible head allows the temperature sensing part follows and closely contacts the object to be measured, and it's possible to high accurate measure more easily.
Specific components may be combined to customize products for the needs of a customer's specific application.
Anritsu Thermometer HD series handheld thermometers allow easy temperature measurement.
These general-purpose thermometers can be used for on-site temperature measurement and various other applications.
Sato Datalogger SK-L200THIIa for temperature and humidity measurements.
CD-ROM for data analysis software and real-time transmission software is attached as accessories.
CD-ROM for data analysis software and real-time transmission software is attached as accessories.
Logged data can be easily displayed and analized on a PC using the software.
Three types of probes are sold separately.
Three types of probes are sold separately.
Sato Digital Wind Speed and Direction Indicator with Alarm WVAT6D0-3-00 is an indicator that displays wind speed and wind direction and also outputs alarm.
The measured data are transmitted from a sensor connected.
This durable aero-plane type wind speed and direction sensor 7980-S-11 is suitable for a general meterological purpose, using in a construction site, using as a building equipment and etc.
Monnit ALTA Soil Moisture Sensor measures soil moisture tension & soil temperature within the soil. It uses a resistive granular matrix element to accurately measure the matric water potential (soil moisture tension) in the soil and a thermistor based temperature element to measure temperature.
- Safe to use in both hot & freezing temperatures
- Reports matric potential (soil water tension)
- Moisture readings in centibar & kPa
- 0 to 240 centibar (kPA)
- Will not dissolve in soil
- Internally compensated for commonly found salinity levels
- Easy to install and use compared to traditional tensiometers
- Stainless steel electrodes
- No maintenance required
- Temperature readings in C/F.
- 5 ft removable lead
Anritsu HHT series probe are high-durability temperature sensors designed to measure high-temperature surfaces.
Specific components may be combined to customize products for the needs of a customer's specific application.
Sato Refractometer SK100R, SK200R series measures liquid content by determining the refractive index of the liquid, based on the principle of total internal reflection.
Sato Barograph
Barograph measures atmospheric pressure with the range of 940 to 1045 hPa and records the measured data on a chart.
Recording period is changeable in 1 day, 7 day and 32 day by the cylinder speed switch.
One box (55 sheets/box) of 7-day chart for one year use is included.
Anritsu WE series probes are temperature sensors designed for stationary surfaces. These self-supporting probes can be used to measure temperaturesimply by placing the probe on the measurement target.
Specific components may be combined to customize products for the needs of a customer's specific application.
The Exotek MC-60CPA is a new generation of microprocessor controlled, pocket size handheld moisture meter.
Exotek MC-60CPA is accurate, reliable and simple to use for rapid and non-destructive determination of the moisture content of paper and paperboard on rolls, stacks or reams. By pressing the sensor against the paper, the moisture content will be displayed within seconds.
Exotek MC-60CPA can be used in production, inspection control and further treatment of paper materials.
The choice of material code makes measurements more accurate. There are 5 selectable material codes for paper.
Sato SK-8950 is a waterproof type Infrared thermometer having the circle laser marker that surrounds the measuring area with red laser. The Waterproof/dustproof property is IP 54. The measuring range is -60 to 550°C. Emissivity is settable with 0.01 steps between 0.10 to 1.00
Anritsu ACSⅡ series products are temperature calibration systems for surface temperature and internal temperature measuring devices.
Temperatures can be set across a wide range, from room temperature to 500°C. These calibration systems are designed for calibration or to check temperature measuring probes.
The Tempmate S1 USB temperature data logger is perfectly adapted to the cold chain applications in the food industry (storage and transport ), but also for monitoring for all types of goods: pharmaceuticals, blood, transportation of works of art, flowers, paper, …