:
Sekonic Universal 6 channel Recorder SP-100 / SP100 records from different sources simultaneously, including mA, V, PT100, Thermocouple.
Sekonic Universal 6 channel Recorder SP-100 / SP100 records from different sources simultaneously, including mA, V, PT100, Thermocouple.
Monnit ALTA Wireless Carbon Dioxide Sensor uses an ultra low-power, high-performance CO2 sensor to measure the amount of carbon dioxide in ambient air.
- Measures 0 to 10000 ppm CO2
- Accurate to +/- 45 ppm + 3% of reading
- Sensor produces instantaneous CO2 readings and 8 hour time weighted average(TWA) readings
EDL Practi-Cal (PRI) Dry Well / Surface Calibrator (PRI) allows for easy testing and verification of virtually any size or shaped surface and insertion-style sensor – in one compact package. Utilizing an interchangeable dry well system, this calibrator has a uniform flat surface alongside a custom drilled insertion dry well. The PRI is ideal for use in the lab or in the field. It weighs in at under 30lbs., and can be taken virtually anywhere.
Anritsu Fine Flexible Internal Probe SF series probes are flexible internal temperature sensors featuring extra-fine thermocouple wires covered with a Teflon-coated sheath.
Specific components may be combined to customize products for the needs of a customer's specific application
Monnit ALTA Wireless Humidity (RH) Sensor allows you to accurately monitor the relative humidity of the air within a room or enclosure. - Measures relative humidity, temp
Aichi Tokei ND Flowsensor is ideal for measuring variety of fluid and outputs open collector pulses with the built-in amplifier type magnetic sensor.
Features
Evikon Gas Transmitter E2618 series is intended for measurement of gases with high accuracy
Features:
- Industrial enclosure with IP65 protection
- Attached or remote sensor options
- Two analog outputs settable to 4-20 mA or 0-10 V
- RS485 Modbus RTU digital interface
- Power supply 12...36 VDC (default), 24 VAC as option
Anritsu BT series probes feature needle tips that can be inserted into semi-solid materials. Needle tips for models with replaceable tips can be purchased separately. Specific components may be combined to customize products for the needs of a customer's specific application
Sato compact type thermohygrograph Mini-Cube 7008-00 fits almost anywhere at your convenience.
One box of 7 day charts included.
(Measuring range: -15 to 40°C 5 to 100%)
Anritsu A series probes are general-purpose temperature sensors designed to measure the temperatures of stationary surfaces.
Specific components may be combined to customize products for the needs of a customer's specific application.
Sato SK-270WP-K is a simple operation waterproof digital thermometer.
Ideal for plants, laboratories, food factories and like that are required temperature management at the site using water.
Elster Kent Helix Woltmann cold water meter can be installed in horizontal, vertical or inclined pipelines without loss of accuracy. This meter not only conforms to relevant BS, ISO and EEC standards, but offers user benefits which greatly exceed these specifications.
Dickson Touch Screen Data Logger TWP were made to simplify, yet enhance your monitoring experience. With a Dickson touchscreen TWP, you can view temperature, humidity or differential pressure data with nothing more than the touch of a finger. With access to your data right on the screen, proving historical monitoring during an audit has ever been easier.
RCM general purpose Flo-Gard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow.
Our reed switches can also be ordered for use in hazardous location (Option IS), when fitted with
LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point and makes field calibration easy.
Ryutai Kogyo Pitot Cell Flowmeter is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min
Anritsu ST series probes are multi-purpose temperature sensors featuring a flexible tape shape. They can be glued to the surfaces of measurement targets for use in a range of applications. Specific components may be combined to customize products for the needs of a customer's specific application.
Anritsu CS series probes are small surface temperature sensors designed to measure the temperature of stationary surface.Specific components may be combined to customize products for the needs of a customer's specific application.
