:
The Anritsu AM-9000 series temperature datalogger records measurements across 6 or 12 channels, with fixed thermocouple and multi-input models available. Store readings in internal memory and transfer them to a PC through USB using optional AMS-950 analysis software.
AMS-950 software is sold separately.
Record several temperature points with one portable instrument. The Anritsu AM-9000 series Thermologger offers 6- and 12-channel configurations, internal data storage and USB communication for transferring recorded measurements to a PC.
Choose a fixed thermocouple model when your measurement setup uses one thermocouple type, or a multi-input model when you need greater input flexibility. Start with the number of measurement points and the probes you intend to connect.
| Model | Channels | Input configuration | Selection guide |
|---|---|---|---|
| AM-9000E / AM-9000K | 6 | Fixed thermocouple type | Up to six points using the selected thermocouple type. |
| AM-9100E / AM-9100K | 12 | Fixed thermocouple type | More measurement points using the selected thermocouple type. |
| AM-9200 | 6 | Multi-input | A six-channel setup requiring selectable thermocouple inputs or DC voltage measurement. |
| AM-9300 | 12 | Multi-input | A twelve-channel setup requiring selectable thermocouple inputs or DC voltage measurement. |
Type E and K fixed-input models are listed above. Type J, T and R versions are optional; specify the required input when enquiring.
| Specification | Details |
|---|---|
| Memory capacity | 120,000 readings |
| PC interface | USB 2.0, Micro-B |
| Temperature resolution | 0.1°C / 1°C |
| DC voltage input | AM-9200 / AM-9300: ±20.000 V; 0.001 V resolution |
| Display | 128 × 64-dot graphic LCD |
| Power supply | Four AA alkaline batteries or optional AC adapter |
| Operating environment | 0 to 40°C; 15 to 80% RH, non-condensing |
| Thermocouple type | Instrument measurement range |
|---|---|
| E | -200 to 800°C |
| K | -200 to 1370°C |
| J | -200 to 1100°C |
| T | -200 to 400°C |
| R | 0 to 1760°C |
Available inputs depend on the selected model. The connected probe must also be rated for the intended temperature and measurement conditions. Refer to the catalogue for accuracy, recording intervals and operating conditions.
AMS-950 analysis software is available separately for transferring recorded data to a PC. Include software in your enquiry if you need to review recordings on a computer.
Standard supplied items include a manual, test report, soft case, communication cable and four AA alkaline batteries. Optional accessories include an AC adapter and carrying case.
Before ordering, confirm the probe configuration, required cable lengths and PC software compatibility. Identify any accessories you already own so their suitability can be checked.
The AM-9000 series succeeds the Anritsu AM-8000 temperature datalogger. Send the full model number of your existing instrument when requesting a replacement.
Check input type, channel count and recording requirements before selecting the new model. Existing probes, software, power adapters and communication cables should be checked individually for compatibility.
For an AM-9000 series quotation, provide your preferred model, quantity, thermocouple type and delivery country. If you have not selected a model, tell us how many points you need to measure, the temperature range and how often readings must be recorded.
Please also identify any probes, AMS-950 software or power accessories required with your order. Use the product enquiry options on this page to contact SL Measurement.
|
Download |
The Anritsu AM-9000 series temperature datalogger records measurements across 6 or 12 channels, with fixed thermocouple and multi-input models available. Store readings in internal memory and transfer them to a PC through USB using optional AMS-950 analysis software.
AMS-950 software is sold separately.
Sato 4-channel datalogger SK-L400T for temperature measurement with K type themocouple probes.
Possible to simultaneously display four temperatures from four different locations on the large LCD. The measured values can be logged on the SD card.
NB. Probes are separately purchased, not included in the main unit.
Sato Temperature and Humidity datalogger SK-L750 Series
Comes with software with graphical display on PC.
SK-L751 (Temperature Measurement) Cat No 8800-00
SK-L754 (Temperature and Humidity Measurement) Cat No 8870-00
Evikon Humidity and temperature transmitter E2218-DM is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point value in air with high accuracy and stability in non-aggressive gases.
Evikon E2218-DM features two freely configurable analog outputs 4-20 mA / 0-10 V and RS485 Modbus RTU interface for direct Fieldbus networking. The sensors are located at the tip of 200 mm long stem, intended for insertion into ventilation airducts.
Monnit ALTA Soil Moisture Sensor measures soil moisture tension & soil temperature within the soil. It uses a resistive granular matrix element to accurately measure the matric water potential (soil moisture tension) in the soil and a thermistor based temperature element to measure temperature.
- Safe to use in both hot & freezing temperatures
- Reports matric potential (soil water tension)
- Moisture readings in centibar & kPa
- 0 to 240 centibar (kPA)
- Will not dissolve in soil
- Internally compensated for commonly found salinity levels
- Easy to install and use compared to traditional tensiometers
- Stainless steel electrodes
- No maintenance required
- Temperature readings in C/F.
- 5 ft removable lead
Monnit ALTA® Wireless Thermocouple Sensors leverage Monnit’s award-winning remote monitoring platform to remotely monitor high-temperature applications, such as commercial ovens, kilns, and chimneys. Users benefit from a wireless data transmission range of 1,200+ ft, bank-grade security, and a temperature range of up to 400°C (752°F).
Monnit’s thermocouple is user-programmed to sleep for a specified interval, awake, capture analog data, and then convert this measurement into a temperature. If the sensor captures temperatures outside of user-specified thresholds, an alert is sent via text, email, or call. Monnit’s hardwired thermocouples feature a needle-style probe at the end of a 6’ lead (a K-Type Quick Connect Thermocouple is also available).
All Dickson chart recorders feature a large 8″ or 6" chart and user-selectable recording timeframes (1-day, 1-week, 1-month) and ranges.
Choose from the following features:
Sekonic Universal 6 channel Recorder SP-100 / SP100 records from different sources simultaneously, including mA, V, PT100, Thermocouple.
The Anritsu AM-8000 series temperature datalogger is a portable instrument available in 6- and 12-channel models for recording multiple measurement points. Internal memory stores readings for transfer to a PC using dedicated software.
Discontinued model: The AM-8000 series has been replaced by the Anritsu AM-9000 series.
Sekonic Digital Thermohygrograph ST50A Displays and records temperature and humidity simultaneously.With an electronic sensor of excellent responsiveness
The Tempmate S1 USB temperature data logger is perfectly adapted to the cold chain applications in the food industry (storage and transport ), but also for monitoring for all types of goods: pharmaceuticals, blood, transportation of works of art, flowers, paper, …
Palmer Aluminum Case Pressure and Temperature Chart Recorders provide proven reliability for accurate measurement and recording of pressure and temperature in many applications. Since 1962 we have manufactured and supplied recorders for industry in the U.S. and around the world. Palmer Recorders are designed for indoor or outdoor use, and provide long service life, even in harsh conditions. Many of our Recorders are still in service after 50 years!
Dickson OCEAView™ cloud monitoring solution is a unified platform based on three key pillars: monitoring, traceability, and alerts. Dickson Environmental Monitoring System, Dickson EMS is designed for fixed monitoring, mobility, and connectivity, OCEAView™ integrates a wide range of advanced data loggers and wireless sensors to help you stay on top of your critical environments and monitor your sensitive products continually.
Sato SK-RHC-1 Temperature Transmitter is electric current 4 to 20mA output type in the SK-RHC series temperature/humidity transmitters.
3 types of probe are provided for SK-RHC series transmitters.
Select the suitable probe to your usage.
AC adapter is available at option.
(The probe shown in the photo is the plug-in type)
