Sato Tipping bucket type rainfall sensor 7980-S-40 is made of stainless steel.
Amount of rainfall is converted to electric contact signals and transmited to an event recorder or a magnetic counter with a two conductor cable
Wood Moisture Meter
:
The New Exotek MC-380XCA is a microprocessor controlled hand-held moisture meter. It is reliable and simple to use and intended for rapid and non-destructive evaluation of the moisture content of wood and building materials, The Exotek MC-380XCA can be used in production, inspection control and detection of water damages. In many cases, Relative Humidity (RH) is a more appropriate term. For this reason, the MC-380CXA is programmed to calculate the RH value from the moisture content value for building material. It also has two selectable scanning depths: 10 mm and 100 mm.
Features:
|
Indispensable for:
|
| Model | Exotek MC-380XCA | |
| Fixed / Portable | Portable | |
| Remarks | Intended users:Woodworkers, Cabinet and furniture makers Floor-ing installers, Contractors and quality assurance inspectors. Anyone who needs a professional quality tool to inspect wood and building materials for accurate moisture content or relative humidity. Wood:230 different species of wood or user defined by density. Building materials:Ytong, Bricks, Wall tiles, Plaster, Eternit slab, Floor tiles, Sand, Sand stone, Lime stonePVC/Linoleum on concrete, Concrete, concrete slab, Clinker. Measuring principle:Capacitance type, non intrusive. Detection of dielectric changes due to variation of Moisture Content in the material using a High Frequency signal. Measuring range - concrete:Building material: 0- 98% Relative air Humidity (RH) Measuring range - moisture content:Wood (@ 200 kg/m3): 0- 85% H2O Building material:0-11% H2O The Maximum value differs depending of the density of the material. Measuring accuracy:Approximately ± 1 % MC Measuring groups (density range):50 Wood Groups . (200-1180 kg/m3) 19 Building Materials Groups. (1200-3000 kg/m3) Scanning depth (selectable):Internal sensor: Maximum 10 mm. 15 mm at high density materials. Measuring Springs:Maximum 100 mm Automatic shut down :Yes, 30 Seconds Battery warning:Yes Working range:0°C/+60°C Display:LCD digital 3 ½ Digits Resolution:0,1 % Casing: ABS Plastic Sensors:Stainless Feather Steel Springs, Built in. Battery:9 V alkaline, L6R22 Case:Artificial Leather SIZE (L x H x D ):150 x 71 x 25 mm Weight (incl. Battery):165 gram |
|
|
Download |
The New Exotek MC-380XCA is a microprocessor controlled hand-held moisture meter. It is reliable and simple to use and intended for rapid and non-destructive evaluation of the moisture content of wood and building materials, The Exotek MC-380XCA can be used in production, inspection control and detection of water damages. In many cases, Relative Humidity (RH) is a more appropriate term. For this reason, the MC-380CXA is programmed to calculate the RH value from the moisture content value for building material. It also has two selectable scanning depths: 10 mm and 100 mm.
16 other products in the same category:
Sato heavy-duty 3-Cup type wind speed sensor 7980-S-13 comes with built-in DC conversion circuit and linearizer.
It outputs voltage (0-1V) proportional to wind spped.
Monnit ALTA Soil Moisture Sensor measures soil moisture tension and soil temperature within the soil. It uses a resistive granular matrix element to accurately measure the matric water potential (soil moisture tension) in the soil and a thermistor based temperature element to measure temperature.
- Safe to use in both hot and freezing temperatures
- Reports matric potential (soil water tension) which is the best indicator of water availability in the soil.
- Moisture readings in centibar and kPa
- 0 to 240 centibar (kPA)
- Will not dissolve in soil
- Internally compensated for commonly found salinity levels
- Easy to install and use compared to traditional tensiometers
- Stainless steel electrodes
- No maintenance required
- Temperature readings in C/F.
- 5 ft removable lead
Yashima's temperature controller and transmitter accepts 15 type of different input from thermocouple, R.T.D. mA & DC voltage. Range setting & alternation can be easy done from thermocouple to R. T. D. or mA to DC voltage. It has programmable scale range and it is so easy that you may program it within few touches!
The Kofloc 6800 backpressure valve is a kind of relief valve that keeps the pressure at the front stage of a valve constant. It can easily and quickly control the pressure of a tank with a large buffer and remove the constant fl ow of a mixed gas, which cannot easily be done by general regulation valves with a subsequent stage controlling function. This new concept of pressure regulation has been attracting much attention.
Applications
• Tank pressure control
• Constant flow control of mixed gas
Monnit ALTA Wireless Carbon Dioxide Sensor uses an ultra low-power, high-performance CO2 sensor to measure the amount of carbon dioxide in ambient air.
- Measures 0 to 10000 ppm CO2
- Accurate to +/- 45 ppm + 3% of reading
- Sensor produces instantaneous CO2 readings and 8 hour time weighted average(TWA) readings
If gases escape through leaks in piping systems (e.g. untight screwed connections, corrosions and so on) ultrasonic noises are generated. By means of LD 400 even the smallest leakages which cannot be heard by the human ear can be detected even from distances of several meters. LD 400 transforms the inaudible signals into a frequency which can be identified. By means of the comfortable sound-proof headset these noises can be realized even in extremely noisy environments.
Due to a particularly designed acoustic trumpet a better focusing of the acoustic waves is achieved. This acoustic trumpet acts like a directional microphone while interfering ambient noises are cushioned and the accurate localization of the leakages is eased even in areas which are difficult to access.
Sato Refractometer SK100R, SK200R series measures liquid content by determining the refractive index of the liquid, based on the principle of total internal reflection.
Sato Digital Wind Speed and Direction Indicator with Alarm WVAT6D0-3-00 is an indicator that displays wind speed and wind direction and also outputs alarm.
The measured data are transmitted from a sensor connected.
This durable aero-plane type wind speed and direction sensor 7980-S-11 is suitable for a general meterological purpose, using in a construction site, using as a building equipment and etc.
Dickson OCEAView™ cloud monitoring solution is a unified platform based on three key pillars: monitoring, traceability, and alerts. Dickson Environmental Monitoring System, Dickson EMS is designed for fixed monitoring, mobility, and connectivity, OCEAView™ integrates a wide range of advanced data loggers and wireless sensors to help you stay on top of your critical environments and monitor your sensitive products continually.
Installation of the Tokico emergency shutoff valve is required at various industrial equipments by the High Pressure Gas Safety Law and the Fire Defense Law.
In the MB series of emergency shutoff valve, CO2 gas cartridge with high initial torque is adopted as drive source, and ball valve making smooth movement is adopted at the valve part.
It shutoffs urgently or opens the pipelines of various fluids and is most suitable as safety disaster prevention equipment which prevents second disaster from occurring.
Sato Non Contact Countdown Timer TM-27 TM-29 is a sanitary-designed countdown timer. You can start the timer by putting your hand over the non-contact sensor without touching. This is helpful to improve efficiency of your work
The Exotek MC-60CPA is a new generation of microprocessor controlled, pocket size handheld moisture meter.
Exotek MC-60CPA is accurate, reliable and simple to use for rapid and non-destructive determination of the moisture content of paper and paperboard on rolls, stacks or reams. By pressing the sensor against the paper, the moisture content will be displayed within seconds.
Exotek MC-60CPA can be used in production, inspection control and further treatment of paper materials.
The choice of material code makes measurements more accurate. There are 5 selectable material codes for paper.
Sekonic Universal 6 channel Recorder SP-100 / SP100 records from different sources simultaneously, including mA, V, PT100, Thermocouple.
Newsteo offers a range of temperature recorders (or data loggers) that allow:
- measuring temperature,
- recording this measurement or transmitting in real time to a supervision center,
- displaying the measurement on a PC, tablet, smart phone …
Radio recorders offered by Newsteo are standalone recorders, battery-powered and easily movable. Their compact design allows them to be easily used for real-time monitoring
Evikon Gas Transmitter E2618 series is intended for measurement of gases with high accuracy
Features:
- Industrial enclosure with IP65 protection
- Attached or remote sensor options
- Two analog outputs settable to 4-20 mA or 0-10 V
- RS485 Modbus RTU digital interface
- Power supply 12...36 VDC (default), 24 VAC as option