Sato Handheld Refractometers — SK-100R Series & SK-200R

Start a countdown without pressing a button with the Sato TM-27 and TM-29 non-contact timers. Hold your hand over the sensor to begin timing, making them practical for handwashing stations, food preparation areas and repetitive workstation tasks.

• TM-27: Set 5–90 seconds in 5-second steps for short, repeated tasks.
• TM-29: Set 1 second to 99 minutes 59 seconds in 1-second steps.
• Touchless operation: Start the countdown and silence the sounding alarm using the sensor.
• Battery operation: Each model uses three AAA batteries.

Check timber and building materials without penetrating pins using the Exotek MC-380XCA moisture meter. Two scanning modes help you compare moisture indications near the surface and through a greater material depth.

• Dual scanning modes: Nominal 10 mm and up to 100 mm scanning depths, depending on the material.
• Material selection: Wood and building-material groups with density settings.
• Inspection tasks: Timber receiving, furniture production, flooring preparation and damp investigations.
• Practical functions: Reading hold, adjustable audible alarm and automatic power-off.

Sato Desktop type Digital PH meter SK-650PH 6427-00 (Probe is separately sold).

Attached sensor arm is convenient to use the stirrer.

Sensor sensitivity display, data memory and many functions are equipped.

This model is not usable for certification purpose

Evikon Gas Transmitter E2618 series is intended for measurement of gases with high accuracy 

Features:

- Industrial enclosure with IP65 protection

- Attached or remote sensor options

- Two analog outputs settable to 4-20 mA or 0-10 V

- RS485 Modbus RTU digital interface

- Power supply 12...36 VDC (default), 24 VAC as option

Check moisture in paper and cardboard without puncturing the material using the Exotek MC-60CPA pinless moisture meter. Place the sensor against the surface for quick checks on suitable paper rolls, stacks and reams.

• Non-destructive measurement: Capacitance sensing without penetrating pins.
• Applications: Paper production, printing, packaging and incoming material inspection.
• Material selection: Select the appropriate material group for the paper or board being checked.
• Portable operation: Handheld digital meter powered by a 9 V battery.

Measure wind speed for a connected monitoring system with the Sato 7980-S-13 three-cup wind speed sensor. Built-in signal conversion and linearisation provide an analogue output proportional to wind speed.

• Measurement: Three-cup anemometer with AC generator sensing.
• Standard output: 0–1 V DC for connection to a compatible indicator or recording system.
• Optional configuration: 4–20 mA output, subject to confirmation.
• System selection: Confirm the measuring range, power supply, cable and receiving instrument before ordering.

Monnit ALTA Soil Moisture Sensor measures soil moisture tension & soil temperature within the soil. It uses a resistive granular matrix element to accurately measure the matric water potential (soil moisture tension) in the soil and a thermistor based temperature element to measure temperature.

- Safe to use in both hot & freezing temperatures
- Reports matric potential (soil water tension) 
- Moisture readings in centibar & kPa
- 0 to 240 centibar (kPA)
- Will not dissolve in soil
- Internally compensated for commonly found salinity levels
- Easy to install and use compared to traditional tensiometers
- Stainless steel electrodes
- No maintenance required
- Temperature readings in C/F.
- 5 ft removable lead 

Installation of the Tokico emergency shutoff valve is required at various industrial equipments by the High Pressure Gas Safety Law and the Fire Defense Law.

In the MB series of emergency shutoff valve, CO2 gas cartridge with high initial torque is adopted as drive source, and ball valve making smooth movement is adopted at the valve part.

It shutoffs urgently or opens the pipelines of various fluids and is most suitable as safety disaster prevention equipment which prevents second disaster from occurring.

Monnit ALTA Wireless Carbon Dioxide Sensor uses an ultra low-power, high-performance CO2 sensor to measure the amount of carbon dioxide in ambient air.

- Measures 0 to 10000 ppm CO2
- Accurate to +/- 45 ppm + 3% of reading
- Sensor produces instantaneous CO2 readings and 8 hour time weighted average(TWA) readings

The Sato 7980-S-40 tipping bucket rainfall sensor converts collected rainfall into electrical contact pulses for a compatible external recorder or counter. Its stainless steel construction and two-wire connection suit installations requiring rainfall measurement at a separate monitoring point.

• Rainfall resolution: 0.5 mm per bucket tip.
• Collector opening: 200 mm diameter.
• Signal: Reed-switch contact output.
• System connection: Two-conductor cable to compatible receiving equipment.

Sekonic Universal 6 channel Recorder SP-100 / SP100 records from different sources simultaneously, including mA, V, PT100, Thermocouple.

Yashima's temperature controller and transmitter accepts 15 type of different input from thermocouple, R.T.D. mA & DC voltage. Range setting & alternation can be easy done from thermocouple to R. T. D. or mA to DC voltage. It has programmable scale range and it is so easy that you may program it within few touches!

The KOFLOC 6800 series regulates pressure on the upstream side of a gas system by releasing gas when pressure exceeds the selected setting. Its compact design suits panel-mounted equipment and tank pressure control.

• Pressure settings: 0.01–0.3 or 0.01–0.6 MPa(G), depending on model.
• Maximum exhaust flow: 0.8, 1 or 10 L/min, depending on model and operating conditions.
• Connections: Rc 1/4 or Rc 1/8.
• Selection: Four versions with material options to suit the gas.

Monitor outdoor wind conditions with the Sato WVAT6D0-3-00 digital wind speed and direction indicator and matching W639-ED1 sensor. The system provides a local display and configurable alarms for site monitoring.

• Wind measurement: Sensor range of 2 to 90 m/s and 0 to 360°.
• Display: Instantaneous and mean wind speed, with 16-point wind direction indication.
• Alerts: Configurable wind alarms with contact, light and audible notification.
• System selection: Specify the indicator, sensor, cable and required output options together.

Dickson OCEAView™ brings wireless environmental monitoring, alarm notifications and traceable records into one platform. Monitor temperature, humidity and other critical parameters using compatible data loggers and sensors for refrigerators, freezers, laboratories, pharmaceutical storage and cold rooms.

• Connected monitoring: LoRaWAN and Bluetooth logger options for fixed equipment and mobile applications.
• Actionable alerts: Email, SMS and voice notification options for excursions and technical alarms.
• Traceable records: Audit trails, measurement history and reporting tools.
• Deployment choice: Cloud or on-premises software.