:
The Anritsu HD series handheld digital thermometers are discontinued and have been replaced by the Anritsu HR series .
For a replacement, match the instrument to your thermocouple type, probe connector and measurement requirements.
The Anritsu HD series digital thermometers were handheld instruments for contact temperature measurement using interchangeable probes. The HD series is discontinued and has been replaced by the Anritsu HR series.
This page retains the earlier model references and pictures to help identify an existing instrument. For a new thermometer, visit the Anritsu HR series product page .
Read the complete model number from the instrument label. The model references below were offered with Type E or Type K thermocouple inputs, identified by the E or K suffix.
| Model picture | HD model references | Version |
|---|---|---|
 |
HD-1100 / HD-1150 | Basic measurement models |
 |
HD-1200 / HD-1250 | Standard models |
 |
HD-1300 / HD-1350 | Models with additional alarm and adjustment functions |
 |
HD-1400 / HD-1450 | LED display models |
 |
HD-1500 / HD-1550 | Memory models |
 |
HD-1650 | Basic model with Celsius/Fahrenheit selection |
 |
HD-1750 | Standard model with Celsius/Fahrenheit selection |
Select the Anritsu HR handheld thermometer according to the work it needs to perform. Do not assume that matching the numerical portion of an HD and HR model guarantees identical functions.
| What to check | Information to provide |
|---|---|
| Thermocouple type | Confirm Type E or Type K on both the thermometer and probe. |
| Probe connector | Identify the ASP or ANP connection. Include a photograph if the connector type is unclear. |
| Temperature range | Specify the lowest and highest temperatures, together with the required display resolution. |
| Recording and outputs | State whether stored readings, computer transfer, an alarm output or an analog output are essential. |
| Working environment | Describe exposure to water, the measurement location and any Celsius/Fahrenheit requirement. |
| Calibration documents | Specify the required calibration points and documentation when requesting a quotation. |
Use this table to identify the corresponding Anritsu HR series model for your discontinued HD thermometer. Retain the correct thermocouple suffix: E for Type E or K for Type K.
| Discontinued HD model | Corresponding HR model | Connector | Model family |
|---|---|---|---|
| HD-1100E / HD-1100K | HR-1100E / HR-1100K | ASP | Basic |
| HD-1150E / HD-1150K | HR-1150E / HR-1150K | ANP | Basic |
| HD-1200E / HD-1200K | HR-1200E / HR-1200K | ASP | Standard |
| HD-1250E / HD-1250K | HR-1250E / HR-1250K | ANP | Standard |
| HD-1300E / HD-1300K | HR-1300E / HR-1300K | ASP | High-function |
| HD-1350E / HD-1350K | HR-1350E / HR-1350K | ANP | High-function |
| HD-1400E / HD-1400K | HR-1400E / HR-1400K | ASP | LED display |
| HD-1450E / HD-1450K | HR-1450E / HR-1450K | ANP | LED display |
| HD-1500E / HD-1500K | HR-1500E / HR-1500K | ASP | Memory recording |
| HD-1550E / HD-1550K | HR-1550E / HR-1550K | ANP | Memory recording |
| HD-1650E / HD-1650K | HR-1650E / HR-1650K | ANP | Basic with °C / °F selection |
| HD-1750E / HD-1750K | HR-1750E / HR-1750K | ANP | Standard with °C / °F selection |
Example: For an HD-1250K, the corresponding model to assess is the HR-1250K, retaining Type K input and the ANP connector. Confirm probe compatibility and required functions before ordering.
Special-output versions: HD-1201, HD-1202, HD-1251, HD-1252, HD-1301, HD-1302, HD-1351 and HD-1352 require a separate replacement assessment. Do not substitute a standard HR model without checking the analog output, alarm connection and connected equipment.
Existing accessories: Confirm compatibility before reusing communication cables, software, power adapters or output accessories.
Probe reuse should be checked against the selected HR model. Confirm the thermocouple type, connector, operating temperature range and condition of the probe before ordering.
Provide the full probe model number and a photograph of its plug. If a new probe is needed, describe the target: a stationary surface, moving surface, liquid, air or internal material temperature. The probe and thermometer should be selected together.
Contact us for pricing and availability of the HR series. Include your existing HD model, probe model, quantity and required functions so a suitable replacement can be identified.
|
Download |
The Anritsu HD series handheld digital thermometers are discontinued and have been replaced by the Anritsu HR series .
For a replacement, match the instrument to your thermocouple type, probe connector and measurement requirements.
Anritsu MG Series Magnetic Probe are temperature sensors designed for stationary surfaces.
Built-in magnets allow these probes to be attached to measurement targets. Specific components may be combined to customize products for the needs of a customer's specific application.
The Anritsu HR series handheld digital thermometer offers Type K or Type E thermocouple models for contact temperature measurement. Choose from basic, standard, LED-display and memory versions, then match the instrument with a probe suited to your application.
Temperature probes are sold separately.
The Anritsu AP-400 and AP-450 printing thermometers produce temperature records directly at the measurement point. Use manual printing for inspection rounds or interval printing to follow temperature changes.
Sato Digital Thermohygrometer PC-5400TRH is easy to read current temperature and humidity from a distance with large LCD (character height: 40mm) . Each min./max. value of temperature and humidity are simultaneously displayed. Alarm setting is available (buzzer sound and LED)
The Evikon E2218-DM duct humidity and temperature transmitter measures air conditions inside ventilation ducts and provides calculated dew point and absolute humidity values.
Check surface temperatures without contact using the Sato SK-8950 infrared thermometer. Its circular laser marker helps position the measurement, while IP54 protection supports handling with wet hands.
The Sato Highest II 7542-00 temperature and humidity meter combines a humidity dial with a digital temperature display for straightforward checks of indoor conditions.
Monnit ALTA® Wireless Thermocouple Sensors leverage Monnit’s award-winning remote monitoring platform to remotely monitor high-temperature applications, such as commercial ovens, kilns, and chimneys. Users benefit from a wireless data transmission range of 1,200+ ft, bank-grade security, and a temperature range of up to 400°C (752°F).
Monnit’s thermocouple is user-programmed to sleep for a specified interval, awake, capture analog data, and then convert this measurement into a temperature. If the sensor captures temperatures outside of user-specified thresholds, an alert is sent via text, email, or call. Monnit’s hardwired thermocouples feature a needle-style probe at the end of a 6’ lead (a K-Type Quick Connect Thermocouple is also available).
The Anritsu AR-6500 series combines non-contact infrared measurement with a Type K contact thermometer input. Use a compatible contact probe as a reference for automatic emissivity setting.
Monnit ALTA Soil Moisture Sensor measures soil moisture tension & soil temperature within the soil. It uses a resistive granular matrix element to accurately measure the matric water potential (soil moisture tension) in the soil and a thermistor based temperature element to measure temperature.
- Safe to use in both hot & freezing temperatures
- Reports matric potential (soil water tension)
- Moisture readings in centibar & kPa
- 0 to 240 centibar (kPA)
- Will not dissolve in soil
- Internally compensated for commonly found salinity levels
- Easy to install and use compared to traditional tensiometers
- Stainless steel electrodes
- No maintenance required
- Temperature readings in C/F.
- 5 ft removable lead
The Evikon E2244 humidity and temperature transmitter measures relative humidity and air temperature for connection to controllers, monitoring instruments and building management systems.
Dickson OCEAView™ brings wireless environmental monitoring, alarm notifications and traceable records into one platform. Monitor temperature, humidity and other critical parameters using compatible data loggers and sensors for refrigerators, freezers, laboratories, pharmaceutical storage and cold rooms.
The Anritsu FL Series fiber optic thermometers measure temperature in microwave, high-frequency and high-voltage environments where conventional electrical sensors can be difficult to use.
The Sato SK-1260 digital thermometer combines portable temperature measurement with stored readings and high/low alarms. Dedicated Type K thermocouple and thermistor probes support different measurement tasks.
The Sato SK-270WP-K waterproof digital thermometer replaces the SK-250WP for routine temperature checks in food preparation, production and laboratory work.
Monnit ALTA Wireless Humidity (RH) Sensor allows you to accurately monitor the relative humidity of the air within a room or enclosure. - Measures relative humidity, temp
