The Anritsu HR series handheld digital thermometer offers Type K or Type E thermocouple models for contact temperature measurement. Choose from basic, standard, LED-display and memory versions, then match the instrument with a probe suited to your application.
Model choices: HR-1100/1150 through HR-1750.
Probe connections: ASP or ANP, depending on model.
Application options: Selected models offer IPX5-equivalent water resistance; HR-1500/1550 models provide memory recording.
Select the thermometer around the way you work. The Anritsu HR series includes instruments for straightforward temperature checks, enhanced measurement functions, LED indication and stored readings.
These Japanese-made contact thermometers use a separate temperature probe. The correct combination depends on the measurement surface or material, temperature range, connector and functions required.
Compare the HR Thermometer Models
Model family
ASP connector
ANP connector
Main distinction
Basic
HR-1100
HR-1150
Routine measurement with hold and automatic power-off.
Standard
HR-1200
HR-1250
Resolution selection, peak/valley hold and backlight.
High-function
HR-1300
HR-1350
Additional alarm and calibration-setting functions.
LED display
HR-1400
HR-1450
LED indication.
Memory
HR-1500
HR-1550
Stored readings and selectable recording intervals.
Basic with °C/°F selection
—
HR-1650
Basic operation with selectable temperature units.
Standard with °C/°F selection
—
HR-1750
Unit selection, resolution selection and backlight.
Add the appropriate K or E suffix to identify the thermocouple input, for example HR-1250K or HR-1250E. The input type is fixed and cannot be switched between K and E.
Model Images
HR-1100 / HR-1150 — Basic Models
HR-1200 / HR-1250 — Standard Models
HR-1300 / HR-1350 — High-Function Models
HR-1400 / HR-1450 — LED Display Models
HR-1500 / HR-1550 — Memory Models
HR-1650 — Basic Model with Celsius and Fahrenheit
HR-1750 — Standard Model with Celsius and Fahrenheit
Measurement Range and Input Selection
Specification
Details
Measurement channels
One
Type K instrument range
-200 to 1370°C at 1°C resolution
Type E instrument range
-200 to 800°C at 1°C resolution
Power
Four AA alkaline batteries
Operating environment
0 to 50°C, 0 to 80% RH, non-condensing
The probe's rated range may be narrower than the thermometer's range. Select the probe and indicator as a complete measurement system.
Which Models Have Water Resistance?
Anritsu specifies IPX5-equivalent water resistance for HR-1100/1150, HR-1200/1250, HR-1400/1450, HR-1650 and HR-1750 models. This rating does not apply to the entire HR range.
For work near water, check the suitability of the probe and connection arrangement as well as the instrument. Follow the manufacturer's handling instructions; water resistance does not mean the instrument can be immersed.
Choose the Probe for the Measurement
The measurement task should determine the probe design. Before ordering, describe what you need to measure and how the sensor will reach it.
Measurement task
Selection details to provide
Stationary surfaces
Surface shape, material, access and required temperature range.
Moving surfaces
Movement type, speed, contact conditions and available access.
Liquids or semi-solid materials
Material, immersion depth, probe dimensions and chemical compatibility.
Air or gas temperature
Temperature range, airflow and required response time.
Browse our temperature probes to select a compatible probe for your measurement task.
Memory Recording and Existing Equipment
HR-1500 and HR-1550 models provide memory recording, including readings taken at selected intervals. If computer transfer is required, include the communication cable and software requirements in your enquiry.
When replacing an existing Anritsu thermometer, provide the complete instrument and probe model numbers. Check both the thermocouple type and connector before reusing a probe.
Watch the HR Series Video
Request an Instrument and Probe Quotation
Send your preferred HR model, required quantity and delivery country. If you need help selecting the instrument and probe, include the measurement task, temperature range and any existing probe model number.
Specify whether you need memory recording, water resistance, Celsius/Fahrenheit selection or calibration documentation. Use the product enquiry options on this page to contact SL Measurement.
The Anritsu HR series handheld digital thermometer offers Type K or Type E thermocouple models for contact temperature measurement. Choose from basic, standard, LED-display and memory versions, then match the instrument with a probe suited to your application.
Model choices: HR-1100/1150 through HR-1750.
Probe connections: ASP or ANP, depending on model.
Application options: Selected models offer IPX5-equivalent water resistance; HR-1500/1550 models provide memory recording.
The Sato SK-1260 digital thermometer combines portable temperature measurement with stored readings and high/low alarms. Dedicated Type K thermocouple and thermistor probes support different measurement tasks.
Splash-resistant: IPX4 protection for everyday handling around wet work areas.
Memory: Store up to 180 readings manually or 120 readings automatically.
Temperature alarms: Set upper and lower limits for audible notification.
Standard probe set: Supplied with the SK-S100K Type K probe; other probes are optional.
The Sato Highest II 7542-00 temperature and humidity meter combines a humidity dial with a digital temperature display for straightforward checks of indoor conditions.
Humidity measurement: Human hair sensor, covering 20 to 100% RH.
Temperature measurement: Thermistor sensor, covering 0 to 50°C.
Wall mounting: Bracket supplied for installation.
Simple power supply: Digital thermometer operates on one AA battery.
Monnit ALTA Wireless Humidity (RH) Sensor allows you to accurately monitor the relative humidity of the air within a room or enclosure. - Measures relative humidity, temp
Anritsu MG Series Magnetic Probe are temperature sensors designed for stationary surfaces. Built-in magnets allow these probes to be attached to measurement targets. Specific components may be combined to customize products for the needs of a customer's specific application.
The Evikon E2244 humidity and temperature transmitter measures relative humidity and air temperature for connection to controllers, monitoring instruments and building management systems.
Measurements: Relative humidity and temperature in air and non-aggressive gases.
Analog outputs: 2 × 4–20 mA and 2 × 0–10 V.
Construction: IP65-rated enclosure.
Mounting: E2244 wall-mount and E2244-DM duct-mount versions.
The Sato SK-270WP-K waterproof digital thermometer replaces the SK-250WP for routine temperature checks in food preparation, production and laboratory work.
Standard probe included: S270WP-01, measuring from -40 to 250°C.
IP67 protection: Dustproof and waterproof body when the probe is correctly connected.
Simple operation: Display hold and automatic power-off.
Probe selection: Dedicated S270WP probes for different measurement tasks.
The Evikon E2218-DM duct humidity and temperature transmitter measures air conditions inside ventilation ducts and provides calculated dew point and absolute humidity values.
Duct installation: 200 mm insertion probe.
Analog signals: Two configurable outputs, selectable as 4–20 mA or 0–10 V.
Check surface temperatures without contact using the Sato SK-8950 infrared thermometer. Its circular laser marker helps position the measurement, while IP54 protection supports handling with wet hands.
Wide measuring range: -60 to 550°C with 0.1°C resolution.
Adjustable emissivity: 0.10 to 1.00 for different surface materials.
Practical inspection functions: MAX, MIN, average, temperature difference and high/low alarms.
The Anritsu AR-6500 series combines non-contact infrared measurement with a Type K contact thermometer input. Use a compatible contact probe as a reference for automatic emissivity setting.
Temperature options: -50 to 500°C or 0 to 1200°C, depending on model.
Small measurement area: Defined optics for checking individual surface targets.
Output options: AR-6501 versions provide a 1 mV/°C analog output.
Contact probes: Selected separately to suit the application.
Dickson OCEAView™ brings wireless environmental monitoring, alarm notifications and traceable records into one platform. Monitor temperature, humidity and other critical parameters using compatible data loggers and sensors for refrigerators, freezers, laboratories, pharmaceutical storage and cold rooms.
Connected monitoring: LoRaWAN and Bluetooth logger options for fixed equipment and mobile applications.
Actionable alerts: Email, SMS and voice notification options for excursions and technical alarms.
Traceable records: Audit trails, measurement history and reporting tools.
Monnit ALTA® Wireless Thermocouple Sensors leverage Monnit’s award-winning remote monitoring platform to remotely monitor high-temperature applications, such as commercial ovens, kilns, and chimneys. Users benefit from a wireless data transmission range of 1,200+ ft, bank-grade security, and a temperature range of up to 400°C (752°F).
Monnit’s thermocouple is user-programmed to sleep for a specified interval, awake, capture analog data, and then convert this measurement into a temperature. If the sensor captures temperatures outside of user-specified thresholds, an alert is sent via text, email, or call. Monnit’s hardwired thermocouples feature a needle-style probe at the end of a 6’ lead (a K-Type Quick Connect Thermocouple is also available).
The Anritsu FL Series fiber optic thermometers measure temperature in microwave, high-frequency and high-voltage environments where conventional electrical sensors can be difficult to use.
Model options: FL-2000 with one channel or FL-2400 with four channels.
Probe selection: Dedicated fiber optic probes for different temperatures, materials and operating conditions.
Integration: Analog temperature output and RS-232C communication.
Configuration: Temperature probes are selected separately and are not included with the instrument.
Sato Digital Thermohygrometer PC-5400TRH is easy to read current temperature and humidity from a distance with large LCD (character height: 40mm) . Each min./max. value of temperature and humidity are simultaneously displayed. Alarm setting is available (buzzer sound and LED)
The Anritsu AP-400 and AP-450 printing thermometers produce temperature records directly at the measurement point. Use manual printing for inspection rounds or interval printing to follow temperature changes.
Built-in printer: Print readings with time information.
Memory: Store up to 100 readings for batch printing.
Model choice: AP-400 with ASP connector or AP-450 with ANP connector.
Probe selection: Match the fixed thermocouple type and connector; probes are sold separately.
Monnit ALTA Soil Moisture Sensor measures soil moisture tension & soil temperature within the soil. It uses a resistive granular matrix element to accurately measure the matric water potential (soil moisture tension) in the soil and a thermistor based temperature element to measure temperature.
- Safe to use in both hot & freezing temperatures - Reports matric potential (soil water tension) - Moisture readings in centibar & kPa - 0 to 240 centibar (kPA) - Will not dissolve in soil - Internally compensated for commonly found salinity levels - Easy to install and use compared to traditional tensiometers - Stainless steel electrodes - No maintenance required - Temperature readings in C/F. - 5 ft removable lead
