Temperature and Humidity Datalogger SK-LTHIIa series

:

Sato Datalogger SK-L200THIIa for temperature and humidity measurements.
CD-ROM for data analysis software and real-time transmission software is attached as accessories.
Logged data can be easily displayed and analized on a PC using the software.
Three types of probes are sold separately.

Features

  • Memory capacity is 8100 lines of data per channel.
    (It is possible to store data for about 506 days with log interval of 90 minutes and about 168 days with log interval of 30 minutes.)
  • The method of storing data is selectable among four logging options :
    1. Once (default)
      When Once is chosen, the datalogger keeps logging until the memory becomes full. The datalogger stops logging when 8100 lines of data are recorded.
    2. Repeatability (overwriting)
      The datalogger overwrites the existing data from the start once the 8100 lines of data are recorded. This is ideal for collecting data during a certain period.
    3. Ends at (limited amount)
      With this logging option, you can specify the end-point for the datalogger to stop logging. This setting is ideal when you want to limit the amount of data to be collected.
    4. By page (partitioning)
      The storage memory is partitioned into blocks, each having the capacity to store 200 lines of data. This enables the datalogger to perform four different tasks in sequence while storing each task's data in one of the four different memory blocks (pages). This is ideal when you want to collect data from multiple sites using one datalogger.

  • The software for data analysis and realtime transmission is attached as standard accessories.
  • The date and time to start logging automatically can be specified by setting the preset start.
  • The measurement data can be transmitted in realtime to a personal computer.
  • USB transmission is adopted .
  • The upper and lower thresholds for warning can be set. When the temperature or humidity threshold is triggered, the alarm mark (Hi or Lo) will light.
  • Probes are interchangeably used with main units.
  • The storage memory can be verified with the memory indicator.
  • The log interval can be selected from 14 options: 1 sec, 2 sec, 5 sec, 10 sec, 15 sec, 30 sec, 1 min, 2 min, 5 min, 10 min, 15 min, 30 min, 60 min. and 90 min.
  • When the power is turned off, data stored in the EEPROM memory is retained.
  • The datalogger ID can be set. This is useful to identify multiple dataloggers.
  • By using data analysis software attached, acquired data can be evaluated easily and quickly, and also evaluated by using commercial spreadsheet software supporting the "CSV" extension such as and Microsoft Excel.
  • By using software attached, logged data can be easily displayed as graphs on a PC.
  • The data transmitted from up to 4 dataloggers (8 channels max.) can be analyzed being displayed in a graph
  • Downloaded data with the"CSV"extension can be evaluated by using Microsoft Excel and other commercial spreadsheets.
  • The highest value, the lowest value and average value per channel can be automatically calculated.
  • The Scroll-bar function can zoom in on any region of the graphs that you want to.
  • Updated data analysis software can be downloaded at the Software download site.
  • Recommended operation conditions have to be minimum system requirements or better.


  • By Data Analysis SoftwareSK-L200THII α
    By Real-Time Transmission SoftwareSK-L200THII α

Standard and Optional Probes
SK-LTHIIα-1 SK-LTHIIα-1 SK-LTHIIα-3
Model SK-LTHIIα-1
Plug-in type		 SK-LTHIIα-2
w/ sensor cord		 SK-LTHIIα-3
Stick type w/ sensor cord
Cat No. No.8176-00 No.8177-00 No.8178-00
Sensor (Temp.) Thermistor
Sensor (Hum.) High Polymeric Resistance change type
Measuring range (Temp.) -10 to 60.0°C
Measuring range (Hum.) 20.0 to 98 % rh (at 23 °C)
Accuracy
(Temp.)		 ±0.5°C at 20.0 to 30.0°C
±1°C at other than above		 ±0.5°C at 15.0 to 35.0°C
±1°C at other than above
Accuracy
(Hum.)		 ±3% rh at 20.0 to 30.0°C (30 to 90% rh)
±7% rh at less than 10.0°C, higher than 50.0°C
±5% rh at other than above		 ±3% rh at 15.0 to 35.0°C (30 to 90% rh)
±7% rh at less than 10.0°C, higher than 50.0°C
±5% rh at other than above
Dimensions (W) 25 x (H) 70 x (D) 20 mm (W) 18 x (H) 51 x (D) 10 mm Ø8 x (L)35 mm
Cord length --- 1.5 m 1.5 m
Weight about 15 g about 65 g about 69 g
Materials ABS resin ABS resin, PVC resin ABS resin, PVC resin, Polyacetal resin
Accessories Test Result

Main units
Model SK-L200THII α
(temperature and humidity measurement type)
Display range -15 to 65.0°C
(depending on a probe connected)
10 to 99.9% rh
Resolution(Temp.) 0.1°C at -9.9 to 65.0°C
1°C at -10°C or less
Resolution(Hum.) 0.1% rh at 15.0 to 99.9% rh
1%rh at less than 15.0%
Accuracy (Temp) ±(0.1°C + 1 digit)
Accuracy (Hum.) ±(0.1% rh + 1 digit)
Probes connected SK-LTHII α series probes
Sampling (display) about 1 sec.
Display functions TIME (display time), INT (log interval) REC (during logging), RES (during preset standby), OUT (during real-time transmission), LCD bars (used memory)
CALL (call for the current measurement data during logging)
Current temperature, Current humidity, Current date and time, low battery symbol, Temp. upper limit (Hi), Temp. lower limit (Lo), Hum. upper limit (Hi), Hum. lower limit (Lo), Temp. alarm ON (Alarm), Hum. alarm ON (Alarm), logging option, setting value of upper and lower limits, error message, ID number
Memory capacity 8100 lines of data, but depending on the logging option
(four logging potions: Once, Repeatability, Ends at, By page)
Log interval 1 sec., 2 sec., 5 sec., 10 sec., 15 sec., 30 sec.
1 min., 2 min.,5 mi.,10 min., 15 min., 30 min., 60 min., 90 min.
Communication USB
Operation ambient -10 to 60°C, no condensing
Storage ambient 0 to 50°C
Power requirement "AAA" size Alkaline battery x 2
Battery life . Under continuous measurement mode : more than 500 hours
. Under logging mode: possible to log 8100 data with every log interval
(ex.: about 506 days with log interval of 90 minutes.)
Dimensions (W) 100 x (H) 73 x (D) 22 mm
Weighs about 123 g (exclusive of batteries)
Materials ABS resin
Accessories CD-Rom (Data analysis and realtime software), USB cable (1.5 m) , USB port cap (factory set), hand strap, "AAA" battery x 2



Download

 Datalogger SK-LTHIIa - Catalogue (687.35k)


16 other products in the same category:

Long Range Wireless Soil Moisture Sensor
Quick view
Monnit

Long Range Wireless Soil Moisture Sensor

Monnit ALTA Soil Moisture Sensor measures soil moisture tension and soil temperature within the soil. It uses a resistive granular matrix element to accurately measure the matric water potential (soil moisture tension) in the soil and a thermistor based temperature element to measure temperature.

- Safe to use in both hot and freezing temperatures
- Reports matric potential (soil water tension) which is the best indicator of water availability in the soil.
- Moisture readings in centibar and kPa
- 0 to 240 centibar (kPA)
- Will not dissolve in soil
- Internally compensated for commonly found salinity levels
- Easy to install and use compared to traditional tensiometers
- Stainless steel electrodes
- No maintenance required
- Temperature readings in C/F.
- 5 ft removable lead 

Round Chart Recorder
Quick view
Dickson

Round Chart Recorder

All Dickson chart recorders feature a large 8″ or 6" chart and user-selectable recording timeframes (1-day, 1-week, 1-month) and ranges.

Choose from the following features:

  • Replaceable Sensor
  • Display
  • Audible Alarms
  • K-Thermocouple Probe
  • Battery Operation
Anritsu Temperature Datalogger AM9000
Quick view
Anritsu

6, 12 channel Temperature Datalogger AM-9000...

Anritsu AM-9000 Data collector is a high-speed multi-point data recorder containing a precision, high-speed A/D converter, a C-MOS microprocessor and large capacity memory. Multipurpose system upgrades are possible through communication with external devices through the RS-232C interface. many functions are concentrated in the compact unit and various temperature measurement regions are approached. It many collect data from as many as 12 channels!

This model is successor of Anritsu AM-8000 Series Temperature Datalogger

Temperature Transmitter
Quick view
Sato

Temperature Transmitter

Sato SK-RHC-1 Temperature Transmitter is electric current 4 to 20mA output type in the SK-RHC series temperature/humidity transmitters.

3 types of probe are provided for SK-RHC series transmitters.

Select the suitable probe to your usage.

AC adapter is available at option.

(The probe shown in the photo is the plug-in type)

Dickson OceaView Long Range LoraWan Wireless Environment Monitoring System
Quick view
Dickson

Dickson OceaView Long Range LoraWan Wireless...

Dickson OCEAView™ cloud monitoring solution is a unified platform based on three key pillars: monitoring, traceability, and alerts.  Dickson Environmental Monitoring System, Dickson EMS is designed for fixed monitoring, mobility, and connectivity, OCEAView™ integrates a wide range of advanced data loggers and wireless sensors to help you stay on top of your critical environments and monitor your sensitive products continually.

Evikon Humidity and Temperature Transmitter (Duct Mount) E2218
Quick view
  • New
Evikon

Evikon Humidity and Temperature Transmitter...

Evikon Humidity and temperature transmitter E2218-DM is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point value in air with high accuracy and stability in non-aggressive gases. 



Evikon E2218-DM features two freely configurable analog outputs 4-20 mA / 0-10 V and RS485 Modbus RTU interface for direct Fieldbus networking. The sensors are located at the tip of 200 mm long stem, intended for insertion into ventilation airducts.

Long Range Wireless Thermocouple (Temperature) Sensor
Quick view
Monnit

Long Range Wireless Thermocouple (Temperature)...

Monnit ALTA® Wireless Thermocouple Sensors leverage Monnit’s award-winning remote monitoring platform to remotely monitor high-temperature applications, such as commercial ovens, kilns, and chimneys. Users benefit from a wireless data transmission range of 1,200+ ft, bank-grade security, and a temperature range of up to 400°C (752°F).

Monnit’s thermocouple is user-programmed to sleep for a specified interval, awake, capture analog data, and then convert this measurement into a temperature. If the sensor captures temperatures outside of user-specified thresholds, an alert is sent via text, email, or call. Monnit’s hardwired thermocouples feature a needle-style probe at the end of a 6’ lead (a K-Type Quick Connect Thermocouple is also available).

Single Use Temperature Data Logger
Quick view
Newsteo

Single Use Temperature Data Logger

The Tempmate S1 USB temperature data logger is perfectly adapted to the cold chain applications in the food industry (storage and transport ), but also for monitoring for all types of goods: pharmaceuticals, blood, transportation of works of art, flowers, paper, …

Palmer Wahl Pressure Recorder Aluminium Pelican Case 8" & 12"
Quick view
Palmer Wahl

Pressure and Temperature Recorder Aluminium /...

Palmer Aluminum Case Pressure and Temperature Chart Recorders provide proven reliability for accurate measurement and recording of pressure and temperature in many applications. Since 1962 we have manufactured and supplied recorders for industry in the U.S. and around the world. Palmer Recorders are designed for indoor or outdoor use, and provide long service life, even in harsh conditions. Many of our Recorders are still in service after 50 years!