Anritsu Temperature Datalogger Model AM-8000 series thermometers are compact handheld units that store measurement data in memory.
Data held in memory can then be transferred to a PC via dedicated software for later analysis or other use.

Anritsu AM-9000 Data collector is a high-speed multi-point data recorder containing a precision, high-speed A/D converter, a C-MOS microprocessor and large capacity memory. Multipurpose system upgrades are possible through communication with external devices through the RS-232C interface. many functions are concentrated in the compact unit and various temperature measurement regions are approached. It many collect data from as many as 12 channels!

This model is successor of Anritsu AM-8000 Series Temperature Datalogger

Sato Desktop type Digital PH meter SK-650PH 6427-00 (Probe is separately sold).

Attached sensor arm is convenient to use the stirrer.

Sensor sensitivity display, data memory and many functions are equipped.

This model is not usable for certification purpose

Anritsu Thermometer HD series handheld thermometers allow easy temperature measurement.
These general-purpose thermometers can be used for on-site temperature measurement and various other applications.

Anritsu Thermometer HR series handheld thermometers featuring high accuracy, reliability and ease of use.
These general-purpose thermometers can be used for on-site temperature measurement and various other applications

Sato Digital Wind Speed and Direction Indicator with Alarm WVAT6D0-3-00 is an indicator that displays wind speed and wind direction and also outputs alarm.

The measured data are transmitted from a sensor connected.

This durable aero-plane type wind speed and direction sensor 7980-S-11 is suitable for a general meterological purpose, using in a construction site, using as a building equipment and etc.

Evikon Gas Transmitter E2618 series is intended for measurement of gases with high accuracy 

Features:

- Industrial enclosure with IP65 protection

- Attached or remote sensor options

- Two analog outputs settable to 4-20 mA or 0-10 V

- RS485 Modbus RTU digital interface

- Power supply 12...36 VDC (default), 24 VAC as option

Evikon Humidity and temperature transmitter E2218-DM is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point value in air with high accuracy and stability in non-aggressive gases. 

Evikon E2218-DM features two freely configurable analog outputs 4-20 mA / 0-10 V and RS485 Modbus RTU interface for direct Fieldbus networking. The sensors are located at the tip of 200 mm long stem, intended for insertion into ventilation airducts.

If gases escape through leaks in piping systems (e.g. untight screwed connections, corrosions and so on) ultrasonic noises are generated. By means of LD 400 even the smallest leakages which cannot be heard by the human ear can be detected even from distances of several meters. LD 400 transforms the inaudible signals into a frequency which can be identified. By means of the comfortable sound-proof headset these noises can be realized even in extremely noisy environments.

Due to a particularly designed acoustic trumpet a better focusing of the acoustic waves is achieved. This acoustic trumpet acts like a directional microphone while interfering ambient noises are cushioned and the accurate localization of the leakages is eased even in areas which are difficult to access.

Sato Non Contact Countdown Timer TM-27 TM-29 is a sanitary-designed countdown timer. You can start the timer by putting your hand over the non-contact sensor without touching. This is helpful to improve efficiency of your work

The Exotek MC-60CPA is a new generation of microprocessor controlled, pocket size handheld moisture meter.

Exotek MC-60CPA is accurate, reliable and simple to use for rapid and non-destructive determination of the moisture content of paper and paperboard on rolls, stacks or reams. By pressing the sensor against the paper, the moisture content will be displayed within seconds.

Exotek MC-60CPA can be used in production, inspection control and further treatment of paper materials.

The choice of material code makes measurements more accurate. There are 5 selectable material codes for paper.

Sato Refractometer SK100R, SK200R series measures liquid content by determining the refractive index of the liquid, based on the principle of total internal reflection.

Sato Temperature and Humidity datalogger SK-L750 Series
Comes with software with graphical display on PC.

SK-L751 (Temperature Measurement) Cat No 8800-00
SK-L754 (Temperature and Humidity Measurement) Cat No 8870-00

Yashima's temperature controller and transmitter accepts 15 type of different input from thermocouple, R.T.D. mA & DC voltage. Range setting & alternation can be easy done from thermocouple to R. T. D. or mA to DC voltage. It has programmable scale range and it is so easy that you may program it within few touches!

Sato Quartz Thermohygrograph NSII-Q, 7210-00, 7211-00

Sato Tipping bucket type rainfall sensor 7980-S-40 is made of stainless steel.

Amount of rainfall is converted to electric contact signals and transmited to an event recorder or a magnetic counter with a two conductor cable

Sato heavy-duty 3-Cup type wind speed sensor 7980-S-13 comes with built-in DC conversion circuit and linearizer.

It outputs voltage (0-1V) proportional to wind spped.

The New Exotek MC-380XCA is a microprocessor controlled hand-held moisture meter. It is reliable and simple to use and intended for rapid and non-destructive evaluation of the moisture content of wood and building materials, The Exotek MC-380XCA can be used in production, inspection control and detection of water damages. In many cases, Relative Humidity (RH) is a more appropriate term. For this reason, the MC-380CXA is programmed to calculate the RH value from the moisture content value for building material. It also has two selectable scanning depths: 10 mm and 100 mm.