RCM Direct Reading Differential Pressure Flowmeter for Liquid & Gas
There are 14 products.
Sekonic Digital Thermohygrograph ST50A Displays and records temperature and humidity simultaneously.With an electronic sensor of excellent responsiveness
Sekonic Digital Thermohygrograph ST50M with memory card recording.
It records on chart paper and/or memory card. The data is ready to export to Excel (.csv) format.
Kobayashi, the first company in Japan to produce and sell recording paper, offers a wide variety of products for instruments used in analysis and measurement of temperature, humidity, wind direction, wind speed, pressure. Kobayashi paper is used for a comprehensive range of applications from weather, medicine, machinery and steel, to chemicals, pharmaceuticals, monitoring and analysis.
RCM general purpose Flo-Gard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow.
Our reed switches can also be ordered for use in hazardous location (Option IS), when fitted with
LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point and makes field calibration easy.
Monnit ALTA Wireless Carbon Dioxide Sensor uses an ultra low-power, high-performance CO2 sensor to measure the amount of carbon dioxide in ambient air.
- Measures 0 to 10000 ppm CO2
- Accurate to +/- 45 ppm + 3% of reading
- Sensor produces instantaneous CO2 readings and 8 hour time weighted average(TWA) readings
Monnit ALTA Wireless Differential Pressure Sensor measures the pressure difference between two input ports and transmits the measurement to iMonnit.
- Measurement range: -500 Pa to 500 Pa
- Calibrated and temperature compensated
Monnit ALTA Wireless Humidity (RH) Sensor allows you to accurately monitor the relative humidity of the air within a room or enclosure. - Measures relative humidity, temp
Monnit ALTA Wireless PSIG Pressure Meter measures pressure in a gas, liquid or vapor supply line and transmits the pressure measurement to iMonnit. This solution combines a standard pressure transducer interfaced to a Monnit ALTA wireless radio.
- Measure pressure with 50 or 300 PSIG transducers (others available upon request)
- Measure non-caustic liquid or vapor pressures
- Pressure transducer is NEMA 4X (IP66), CE Rated
Monnit ALTA Soil Moisture Sensor measures soil moisture tension and soil temperature within the soil. It uses a resistive granular matrix element to accurately measure the matric water potential (soil moisture tension) in the soil and a thermistor based temperature element to measure temperature.
- Safe to use in both hot and freezing temperatures
- Reports matric potential (soil water tension) which is the best indicator of water availability in the soil.
- Moisture readings in centibar and kPa
- 0 to 240 centibar (kPA)
- Will not dissolve in soil
- Internally compensated for commonly found salinity levels
- Easy to install and use compared to traditional tensiometers
- Stainless steel electrodes
- No maintenance required
- Temperature readings in C/F.
- 5 ft removable lead
Monnit ALTA® Wireless Thermocouple Sensors leverage Monnit’s award-winning remote monitoring platform to remotely monitor high-temperature applications, such as commercial ovens, kilns, and chimneys. Users benefit from a wireless data transmission range of 1,200+ ft, bank-grade security, and a temperature range of up to 400°C (752°F).
Monnit’s thermocouple is user-programmed to sleep for a specified interval, awake, capture analog data, and then convert this measurement into a temperature. If the sensor captures temperatures outside of user-specified thresholds, an alert is sent via text, email, or call. Monnit’s hardwired thermocouples feature a needle-style probe at the end of a 6’ lead (a K-Type Quick Connect Thermocouple is also available).
Sekonic C-7000 Handheld spectrometer, designed especially for industrial use.
Main Measurement & Function
- Illuminance ★- 1 to 200,000lx in ambient / 20 to 20,500lx・ s in flash
- Color temperature ★ - 1,563 K to 100,000 K
- Color rendering index - CRI (Ra, R1 to R15, comparison), TM-30 (Rf, Rg), SSI, TLCI/TLMF
- Spectrum analysis : 380nm to 780nm
- PPFD (photosynthesis photon flux density)
- Chromaticity coordinates indication
- Continuous / Single measurement selection
Sekonic Universal 6 channel Recorder SP-100 / SP100 records from different sources simultaneously, including mA, V, PT100, Thermocouple.