There are 12 products.

Active filters

  • Categories: Other
  • Categories: Pressure
  • Brand: Monnit
  • Brand: Others
  • Brand: Palmer Wahl

Palmer Wahl Differential Pressure Recorder Model 524 offers you dependability you can trust from a company you know. Designed primarily for use in the Oil and Gas industry, Differential Pressure Chart Recorders are ideal for monitoring flow*, filtration, and liquid levels. Palmer’s DP Recorder measures the differential between two inputs, from 20 to 400 Inches of Water. Maximum input pressure up to 2500 psi.

This model is also available with up to two additional pens for measuring static pressure up to 30,000 PSI or 600 Bar; and/or temperature from -30° to 600°F (0° to 300°C), with non-mercury temperature elements and 10 feet of capillary standard.

The Wahl DP Series Differential Pressure Transducers / Transmitters are extremely reliable, small and lightweight piezoresistive pressure sensors in a compact, rugged, all 304 stainless steel housing and sensor, rated at IP67.

Appropriate for harsh environments, outdoor monitoring or in applications where dust and particulate matter may exist, they utilize silicon sensors resistant to shock, vibration, EMI/RFI and wide temperature variations.

If gases escape through leaks in piping systems (e.g. untight screwed connections, corrosions and so on) ultrasonic noises are generated. By means of LD 400 even the smallest leakages which cannot be heard by the human ear can be detected even from distances of several meters. LD 400 transforms the inaudible signals into a frequency which can be identified. By means of the comfortable sound-proof headset these noises can be realized even in extremely noisy environments.

Due to a particularly designed acoustic trumpet a better focusing of the acoustic waves is achieved. This acoustic trumpet acts like a directional microphone while interfering ambient noises are cushioned and the accurate localization of the leakages is eased even in areas which are difficult to access.

Monnit ALTA Wireless Carbon Dioxide Sensor uses an ultra low-power, high-performance CO2 sensor to measure the amount of carbon dioxide in ambient air.

- Measures 0 to 10000 ppm CO2
- Accurate to +/- 45 ppm + 3% of reading
- Sensor produces instantaneous CO2 readings and 8 hour time weighted average(TWA) readings

Monnit ALTA Wireless PSIG Pressure Meter measures pressure in a gas, liquid or vapor supply line and transmits the pressure measurement to iMonnit. This solution combines a standard pressure transducer interfaced to a Monnit ALTA wireless radio.

- Measure pressure with 50 or 300 PSIG transducers (others available upon request)
- Measure non-caustic liquid or vapor pressures
- Pressure transducer is NEMA 4X (IP66), CE Rated

Monnit ALTA Soil Moisture Sensor measures soil moisture tension and soil temperature within the soil. It uses a resistive granular matrix element to accurately measure the matric water potential (soil moisture tension) in the soil and a thermistor based temperature element to measure temperature.

- Safe to use in both hot and freezing temperatures
- Reports matric potential (soil water tension) which is the best indicator of water availability in the soil.
- Moisture readings in centibar and kPa
- 0 to 240 centibar (kPA)
- Will not dissolve in soil
- Internally compensated for commonly found salinity levels
- Easy to install and use compared to traditional tensiometers
- Stainless steel electrodes
- No maintenance required
- Temperature readings in C/F.
- 5 ft removable lead 

The Exotek MC-60CPA is a new generation of microprocessor controlled, pocket size handheld moisture meter.

Exotek MC-60CPA is accurate, reliable and simple to use for rapid and non-destructive determination of the moisture content of paper and paperboard on rolls, stacks or reams. By pressing the sensor against the paper, the moisture content will be displayed within seconds.

Exotek MC-60CPA can be used in production, inspection control and further treatment of paper materials.

The choice of material code makes measurements more accurate. There are 5 selectable material codes for paper.

Palmer Aluminum Case Pressure and Temperature Chart Recorders provide proven reliability for accurate measurement and recording of pressure and temperature in many applications. Since 1962 we have manufactured and supplied recorders for industry in the U.S. and around the world. Palmer Recorders are designed for indoor or outdoor use, and provide long service life, even in harsh conditions. Many of our Recorders are still in service after 50 years!

The Wahl SS Series Silicon Pressure Transducers / Transmitters are extremely reliable, small and lightweight piezoresistive pressure sensors in a compact, rugged, all 304 stainless steel housing and sensor, rated at IP67.

The Wahl CS Series Ceramic Pressure Transducers / Transmitters utilize a ceramic pressure measurement sensor that is highly resistant to corrosion and chemicals. These sensors are extremely reliable, small and lightweight piezoresistive pressure sensors in a compact, rugged, all 304 stainless steel body, rated at IP67.

Yashima's temperature controller and transmitter accepts 15 type of different input from thermocouple, R.T.D. mA & DC voltage. Range setting & alternation can be easy done from thermocouple to R. T. D. or mA to DC voltage. It has programmable scale range and it is so easy that you may program it within few touches!

The New Exotek MC-380XCA is a microprocessor controlled hand-held moisture meter. It is reliable and simple to use and intended for rapid and non-destructive evaluation of the moisture content of wood and building materials, The Exotek MC-380XCA can be used in production, inspection control and detection of water damages. In many cases, Relative Humidity (RH) is a more appropriate term. For this reason, the MC-380CXA is programmed to calculate the RH value from the moisture content value for building material. It also has two selectable scanning depths: 10 mm and 100 mm.