RCM Direct Reading Differential Pressure Flowmeter for Liquid & Gas
There are 12 products.
Palmer Wahl Differential Pressure Recorder Model 524 offers you dependability you can trust from a company you know. Designed primarily for use in the Oil and Gas industry, Differential Pressure Chart Recorders are ideal for monitoring flow*, filtration, and liquid levels. Palmer’s DP Recorder measures the differential between two inputs, from 20 to 400 Inches of Water. Maximum input pressure up to 2500 psi.
This model is also available with up to two additional pens for measuring static pressure up to 30,000 PSI or 600 Bar; and/or temperature from -30° to 600°F (0° to 300°C), with non-mercury temperature elements and 10 feet of capillary standard.
The Wahl DP Series Differential Pressure Transducers / Transmitters are extremely reliable, small and lightweight piezoresistive pressure sensors in a compact, rugged, all 304 stainless steel housing and sensor, rated at IP67.
Appropriate for harsh environments, outdoor monitoring or in applications where dust and particulate matter may exist, they utilize silicon sensors resistant to shock, vibration, EMI/RFI and wide temperature variations.
RCM general purpose Flo-Gard II flow switches (liquid) reed switches make or break contacts by detecting the position of a magnet permanently attached to the bellow.
Our reed switches can also be ordered for use in hazardous location (Option IS), when fitted with
LED's (Option LED) it provides viewing at a glance when flow rate goes below or above the set point and makes field calibration easy.
Monnit ALTA Wireless Carbon Dioxide Sensor uses an ultra low-power, high-performance CO2 sensor to measure the amount of carbon dioxide in ambient air.
- Measures 0 to 10000 ppm CO2
- Accurate to +/- 45 ppm + 3% of reading
- Sensor produces instantaneous CO2 readings and 8 hour time weighted average(TWA) readings
Monnit ALTA Wireless Differential Pressure Sensor measures the pressure difference between two input ports and transmits the measurement to iMonnit.
- Measurement range: -500 Pa to 500 Pa
- Calibrated and temperature compensated
Monnit ALTA Wireless Humidity (RH) Sensor allows you to accurately monitor the relative humidity of the air within a room or enclosure. - Measures relative humidity, temp
Monnit ALTA Wireless PSIG Pressure Meter measures pressure in a gas, liquid or vapor supply line and transmits the pressure measurement to iMonnit. This solution combines a standard pressure transducer interfaced to a Monnit ALTA wireless radio.
- Measure pressure with 50 or 300 PSIG transducers (others available upon request)
- Measure non-caustic liquid or vapor pressures
- Pressure transducer is NEMA 4X (IP66), CE Rated
Monnit ALTA Soil Moisture Sensor measures soil moisture tension and soil temperature within the soil. It uses a resistive granular matrix element to accurately measure the matric water potential (soil moisture tension) in the soil and a thermistor based temperature element to measure temperature.
- Safe to use in both hot and freezing temperatures
- Reports matric potential (soil water tension) which is the best indicator of water availability in the soil.
- Moisture readings in centibar and kPa
- 0 to 240 centibar (kPA)
- Will not dissolve in soil
- Internally compensated for commonly found salinity levels
- Easy to install and use compared to traditional tensiometers
- Stainless steel electrodes
- No maintenance required
- Temperature readings in C/F.
- 5 ft removable lead
Monnit ALTA® Wireless Thermocouple Sensors leverage Monnit’s award-winning remote monitoring platform to remotely monitor high-temperature applications, such as commercial ovens, kilns, and chimneys. Users benefit from a wireless data transmission range of 1,200+ ft, bank-grade security, and a temperature range of up to 400°C (752°F).
Monnit’s thermocouple is user-programmed to sleep for a specified interval, awake, capture analog data, and then convert this measurement into a temperature. If the sensor captures temperatures outside of user-specified thresholds, an alert is sent via text, email, or call. Monnit’s hardwired thermocouples feature a needle-style probe at the end of a 6’ lead (a K-Type Quick Connect Thermocouple is also available).
Palmer Aluminum Case Pressure and Temperature Chart Recorders provide proven reliability for accurate measurement and recording of pressure and temperature in many applications. Since 1962 we have manufactured and supplied recorders for industry in the U.S. and around the world. Palmer Recorders are designed for indoor or outdoor use, and provide long service life, even in harsh conditions. Many of our Recorders are still in service after 50 years!
The Wahl SS Series Silicon Pressure Transducers / Transmitters are extremely reliable, small and lightweight piezoresistive pressure sensors in a compact, rugged, all 304 stainless steel housing and sensor, rated at IP67.
The Wahl CS Series Ceramic Pressure Transducers / Transmitters utilize a ceramic pressure measurement sensor that is highly resistant to corrosion and chemicals. These sensors are extremely reliable, small and lightweight piezoresistive pressure sensors in a compact, rugged, all 304 stainless steel body, rated at IP67.