Reference:
Check heat conditions at worksites, sports facilities and outdoor activity areas with the Sato SK-170GT WBGT monitor. Its built-in black globe accounts for radiant heat while the instrument displays WBGT, air temperature, globe temperature and relative humidity.
Choose indoor or outdoor measurement mode, set a WBGT alarm and review maximum or minimum readings. One 9 V battery and a hard carrying case are included.
Original
Free Delivery in Singapore (except Sensitive Area)
Local Support
When air temperature alone does not tell the whole story, use the SK-170GT to check the surrounding heat conditions. This handheld instrument combines air temperature, humidity and black globe measurements to calculate the Wet Bulb Globe Temperature (WBGT) index. It is a practical tool for checks at construction sites, production areas, farms, schools and sports facilities.
| Measurement | Range | Accuracy |
|---|---|---|
| WBGT index | 0.0 to 50.0°C | ±2.0°C |
| Air temperature | 0.0 to 50.0°C | ±0.6°C |
| Globe temperature | 0.0 to 80.0°C | ±1.2°C from 20.0 to 60.0°C; ±2.0°C elsewhere |
| Relative humidity | 10.0 to 95.0% RH | ±3.0% RH from 30.0 to 90.0% RH at 20 to 40°C; ±5.0% RH elsewhere |
| Model / catalogue number | SK-170GT / 8312-00 |
|---|---|
| Standard | JIS B 7922 Class 2 conformity within its specified conditions |
| Resolution | 0.1°C and 0.1% RH |
| Sampling interval | Approximately 2 seconds |
| WBGT alarm setting | 20.0 to 49.9°C in 0.1°C steps; the alarm cannot be disabled |
| Wind speed input | Manually set from 0.1 to 3.0 m/s for calculation; wind speed is not measured by the instrument |
| Power | One 9 V battery |
| Dimensions | 71 × 275 × 30 mm; depth excludes the 60 mm diameter globe |
| Included | SK-170GT monitor, 9 V battery, hard carrying case and instruction manual |
Need continuous observation? The rear mounting hole accepts a suitable tripod. Real-time PC transmission requires an optional RS-232C cable. The tripod, cable and radiant heat shield are not included in this listing.
WBGT readings help assess environmental heat conditions as part of a heat management procedure. Select the correct indoor or outdoor mode and enter a wind speed value appropriate to the location.
For application guidance and further details, visit the main SK-170GT product page or read the Sato manufacturer specifications.
|
Download |
|
Download |
Check heat conditions at worksites, sports facilities and outdoor activity areas with the Sato SK-170GT WBGT monitor. Its built-in black globe accounts for radiant heat while the instrument displays WBGT, air temperature, globe temperature and relative humidity.
Choose indoor or outdoor measurement mode, set a WBGT alarm and review maximum or minimum readings. One 9 V battery and a hard carrying case are included.
Check temperatures, save readings and receive an audible alert when a set limit is reached. This Sato SK-1260 set includes the SK-S100K Type K probe for liquids, viscous liquids and semisolid materials.
The supplied probe is rated from −100 to 300°C; the meter displays readings from −99.9°C with this probe. The set also includes four AAA batteries, a carrying pouch and an instruction manual. Other probes and the printer are sold separately.
Check room temperature and humidity at a glance with the Sato Highest II 7542-00. A clear analog dial shows relative humidity, while a separate digital display shows temperature to 0.1°C.
The supplied bracket makes wall installation straightforward. Ideal for local room checks where staff need visible readings without connecting a computer or changing chart paper.
Compact logging for temperature and humidity. The testo 174H monitors indoor conditions with two built-in sensors, an easy-to-read display and memory for up to 16,000 readings. Ideal for storage rooms, archives and routine environmental checks. This listing is for the logger only: a compatible USB interface is required to set it up and download data.
Humidity and temperature at a glance. The Sato Highest I (7540-00) pairs a precision hair hygrometer with a glass thermometer in one easy-to-read instrument. Check 20–100% RH and −10 to 50°C during routine indoor inspections, without batteries or a data logger.
Sato PC-5410TRH is a digital temperature and humidity meter with a large LCD for checking indoor conditions at a glance. Current readings and the highest and lowest values are displayed together.
Keep a visible paper record of temperature and humidity with the Sato Sigma II NSII-Q thermohygrograph. Its clear cover lets you check the chart at a glance, while the quartz clock supports 1-day, 7-day or 32-day recording.
Choose your temperature range: 7210-00 measures −15 to 40°C; 7211-00 measures −10 to 50°C. Both measure 0 to 100% RH. Select the model that matches your site conditions before adding to cart.
See the current, highest and lowest temperature together with the Sato PC-3500 digital thermometer. Connect its supplied 3 m probe to measure away from the display, or disconnect it to use the built-in sensor.
Manufacturer-discontinued; available while remaining stock lasts. This listing is for the PC-3500 (Cat. No. 1740-50) with its external probe and LR44 battery. Press RESET when starting a new monitoring period or switching measurement locations.
Check temperatures in food preparation, production and laboratory work with the Sato SK-270WP-K. This ready-to-use set includes the S270WP-01 standard probe, which measures from −40.0 to 250.0°C.
The thermometer starts measuring when switched on and has a HOLD function for reading the display. Its body is IP67 rated when the probe is correctly connected. Two AAA batteries, a neck strap and a protective vinyl cover are included.
Record temperature and humidity with the Sato SK-L754 data logger. Choose the probe position that suits your installation: SK-L754-1 plugs directly into the logger, while SK-L754-2 has a 1.6 m cable so the sensing tip can be positioned away from it.
Select your probe before adding to cart. Each option includes one SK-L754 logger and one selected probe. Price and availability update with your choice. The logger stores up to 16,000 readings per channel for later PC review.
Record up to six measurement points on one paper chart with the Sekonic SP-100 portable hybrid recorder. Configurable inputs support thermocouples, resistance thermometers, DC voltage and current measurement.
Manufacturer-discontinued; offered from remaining stock. The chart gives operators a visible record on site. Temperature sensors, a current-input shunt and the optional memory-card unit must be selected separately as required for your application.
The Dickson SL4100 records temperature on a 4-inch circular chart while showing the current reading on its LCD. Select a 24-hour or 7-day chart rotation to suit your monitoring schedule.
Keep your existing Sato SK-L200THIIα temperature and humidity datalogger in service. Choose the SK-LTHIIα-1 plug-in probe or the SK-LTHIIα-2 remote probe with 1.5 m cable. Each option is one replacement probe only; the discontinued logger is not included.
Select your probe model to see its price and stock status. These legacy probes are not interchangeable with probes for the newer SK-L754 datalogger.
Manufacturer-discontinued — available only while our remaining stock lasts. The Sekonic ST-50A (ST50A) displays temperature and humidity digitally while recording both readings on a paper chart.
A practical choice if you need another ST-50A to match an existing installation. The standard set includes one chart, a red recording pen and a blue recording pen. Replacement chart paper and recording pens are listed separately.
Take quick contact temperature readings with the compact Sato PC-9215 (1747-00). Its fixed stainless-steel probe measures from −50 to 150°C, while MAX/MIN and HOLD functions make readings easier to review.
This is the original drip-proof PC-9215, supplied with a clip-on probe sheath and an LR1130 button battery. Check the model number if you are replacing a PC-9215II; the two versions have different specifications.
Sekonic ST-50M (ST50M) is discontinued. This model combined temperature and humidity paper chart recording with SD card data storage. For a new instrument, shop Sato Sigma II for paper charts or shop Sato SK-L754 for electronic logging. Existing ST-50M users can still order compatible chart paper and recording pens below.
Isuzu TH27R is discontinued. For a new temperature and humidity paper chart recorder, choose the Sato Sigma II 7210-00 or 7211-00 according to the temperature range you need. This TH27R page is retained to help identify existing instruments and their consumables; the TH27R itself is no longer available to order.
