Reference:
Tokico FGBB835BDL is a 25 mm (1-inch) positive displacement oil flowmeter for local measurement of diesel, kerosene and compatible oils. Choose the counter arrangement required for your installation.
Select 02X or 04X above to view that version’s price and availability.
Original
Free Delivery in Singapore (except Sensitive Area)
Local Support
The Tokico FGBB835BDL is an FGB-series positive displacement meter for measuring accumulated oil volume. Its mechanical counter gives operators a local reading without an external power supply. The FGB measuring unit uses resin gear-type rotors.
This page offers two counter versions with the same 25 mm (1-inch) connection: 02X for accumulated volume only, and 04X when a separate counter must be reset after a delivery or transfer. Select the version that matches your existing meter or operating procedure.
| Model | Counter arrangement | Suitable when |
|---|---|---|
| FGBB835BDL-02X | Seven-digit non-resettable totaliser | You need a continuous accumulated volume reading. |
| FGBB835BDL-04X | Seven-digit totaliser and five-digit resettable counter | You need to read individual deliveries or transfers while retaining the accumulated total. |
| Item | FGBB835BDL-02X / FGBB835BDL-04X |
|---|---|
| Meter type | Mechanical positive displacement oil flowmeter, FGB series |
| Connection size | 25 mm (1 inch) |
| Flange | JIS 10K FF |
| Accuracy | ±0.5% within the specified operating conditions |
| Flow range | Depends on the measured oil and its viscosity; the existing 02X listing specifies 150–3,000 L/h. Confirm the operating range for your application. |
| Maximum working pressure | 0.98 MPa (approximately 9.8 bar) |
| Maximum fluid temperature | 80°C for kerosene and diesel/light oil; 120°C for applicable heavy oils |
| Body | FCD400 ductile iron |
| Rotors | PPS resin, gear type |
| Standard flow direction | Right to left |
| Approximate dimensions | 125 mm flange diameter × 200 mm face-to-face length |
| Approximate weight | 10 kg |
Check the full model code on the existing meter, the oil type and viscosity, minimum and maximum flow rates, operating temperature, flange connection and required flow direction. For more information on selecting Tokico mechanical meters, see the Tokico positive displacement oil flowmeter guide.
|
Download |
|
Download |
Tokico FGBB835BDL is a 25 mm (1-inch) positive displacement oil flowmeter for local measurement of diesel, kerosene and compatible oils. Choose the counter arrangement required for your installation.
Select 02X or 04X above to view that version’s price and availability.
Draw and dispense liquids with this 25 mL silicone pipette filler. Its three-valve bulb lets you expel air, draw liquid into a compatible pipette and control its release—without mouth pipetting.
Suitable for many standard glass measuring pipettes. One filler supplied; pipette sold separately. Check the fit before ordering, particularly for small plastic pipettes.
Tokico FGBB631BDL is a 20 mm (3/4-inch) positive displacement oil flowmeter for diesel, kerosene and compatible oils. Select the indicator that suits how you read and record oil usage.
Select the model above to view its price and availability. Each selection supplies one flowmeter.
Start a countdown by holding your hand over the sensor—useful at handwashing stations, food preparation areas and workstations where repeated timing is needed.
Choose your model: TM-27 (1707-20) for short 5–90 second intervals in 5-second steps, or TM-29 (1707-30) for 1 second to 99 minutes 59 seconds in 1-second steps. Each selection supplies one timer; price and availability should update with the selected model.
Choose a Tokico 40 mm (1½-inch) positive displacement oil flowmeter with the indicator suited to your application. Both versions measure accumulated oil volume, but their display and operating specifications differ.
Select the required model above to view its price and availability. Each selection supplies one flowmeter.
Replace your recorder paper with Kobayashi B957KK100-11T folded chart paper. It has a 0–100 printed scale, 200 mm overall width and 180 mm printed width.
You receive B957KK100-11T: 10 pads per pack. This paper is also listed under 180-100-0100-1 and B9573AN references. Check the code and scale on your existing chart before ordering.
Record up to six measurement points on one paper chart with the Sekonic SP-100 portable hybrid recorder. Configurable inputs support thermocouples, resistance thermometers, DC voltage and current measurement.
Manufacturer-discontinued; offered from remaining stock. The chart gives operators a visible record on site. Temperature sensors, a current-input shunt and the optional memory-card unit must be selected separately as required for your application.
