The Kofloc 6800 backpressure valve is a kind of relief valve that keeps the pressure at the front stage of a valve constant. It can easily and quickly control the pressure of a tank with a large buffer and remove the constant fl ow of a mixed gas, which cannot easily be done by general regulation valves with a subsequent stage controlling function. This new concept of pressure regulation has been attracting much attention.
Applications
• Tank pressure control
• Constant flow control of mixed gas
There are 13 products.
Active filters
Sato Desktop type Digital PH meter SK-650PH 6427-00 (Probe is separately sold).
Attached sensor arm is convenient to use the stirrer.
Sensor sensitivity display, data memory and many functions are equipped.
This model is not usable for certification purpose
Sato Digital Wind Speed and Direction Indicator with Alarm WVAT6D0-3-00 is an indicator that displays wind speed and wind direction and also outputs alarm.
The measured data are transmitted from a sensor connected.
This durable aero-plane type wind speed and direction sensor 7980-S-11 is suitable for a general meterological purpose, using in a construction site, using as a building equipment and etc.
Purge meters are variable area flowmeters that used to measure small flowrates.
It is suitable for liquid, gas, oil and compressed air.
Ryutai Kogyo PGF-N series are calibrated to your operating temperature and pressure, as well as having scale range of your request.
It comes with stainless steel float and a metering a valve.
Ryutai Kogyo Metal Tube flow transmitter MCF can be linked with a remote indicator, integrator and recorder A reliable electronic transmitter housed in the aluminum indicator case provides current signals (DC, analog) proportional to measured flow rates for remote instruments.
MCF series are now used in the computer-controlled flow system.
The body that measures fluid flow has been designed with consideration having been given to many factors such as flow direction, flow rate, pressure, temperature, presence or absence of slurries and accessories required.
The Precisely manufactured transmitter which is enclosed in the indicator case provides reliable output signals.
Ryutai Kogyo Model GTF and ATF is widely used for its high quality and ease of use. This flow meter is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of liquid or gas with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.l There are widely used for its high quality and ease of use
Sato Non Contact Countdown Timer TM-27 TM-29 is a sanitary-designed countdown timer. You can start the timer by putting your hand over the non-contact sensor without touching. This is helpful to improve efficiency of your work
Ryutai Kogyo Pitot Cell Flowmeter is an economic flowmeter that measures large flow rate of water in large pipe. It is suitable for both hot and cold water, installation is easy and has very little pressure loss. In addition, the reading is displayed in liter / min
Compact, self contained Kofloc Mass Flow Meters are designed to read flow rates of gases. The rugged design coupled with instrumentation grade accuracy provides versatile and economical means of flow control.
Sato Refractometer SK100R, SK200R series measures liquid content by determining the refractive index of the liquid, based on the principle of total internal reflection.
Sato Tipping bucket type rainfall sensor 7980-S-40 is made of stainless steel.
Amount of rainfall is converted to electric contact signals and transmited to an event recorder or a magnetic counter with a two conductor cable
Ryutai Kogyo Model ADF is in-line type, installed directly in your pipe line, and measure instantaneous flow rate of water with high accuracy. Simple design and rigid construction enable you to check or disassemble the unit without any special knowledge. Besides above feature, you can select the material from our wide variety of materials to meet your specific application.
Sato heavy-duty 3-Cup type wind speed sensor 7980-S-13 comes with built-in DC conversion circuit and linearizer.
It outputs voltage (0-1V) proportional to wind spped.