SK-L200THII α (temperature and humidity measurement type)
Display range
-15 to 65.0°C (depending on a probe connected)
10 to 99.9% rh
Resolution(Temp.)
0.1°C at -9.9 to 65.0°C 1°C at -10°C or less
Resolution(Hum.)
0.1% rh at 15.0 to 99.9% rh 1%rh at less than 15.0%
Accuracy (Temp)
±(0.1°C + 1 digit)
Accuracy (Hum.)
±(0.1% rh + 1 digit)
Probes connected
SK-LTHII α series probes
Sampling (display)
about 1 sec.
Display functions
TIME (display time), INT (log interval) REC (during logging), RES (during preset standby), OUT (during real-time transmission), LCD bars (used memory) CALL (call for the current measurement data during logging) Current temperature, Current humidity, Current date and time, low battery symbol, Temp. upper limit (Hi), Temp. lower limit (Lo), Hum. upper limit (Hi), Hum. lower limit (Lo), Temp. alarm ON (Alarm), Hum. alarm ON (Alarm), logging option, setting value of upper and lower limits, error message, ID number
Memory capacity
8100 lines of data, but depending on the logging option (four logging potions: Once, Repeatability, Ends at, By page)
. Under continuous measurement mode : more than 500 hours . Under logging mode: possible to log 8100 data with every log interval (ex.: about 506 days with log interval of 90 minutes.)
Dimensions
(W) 100 x (H) 73 x (D) 22 mm
Weighs
about 123 g (exclusive of batteries)
Materials
ABS resin
Accessories
CD-Rom (Data analysis and realtime software), USB cable (1.5 m) , USB port cap (factory set), hand strap, "AAA" battery x 2
Standard and Optional Probes
Model
SK-LTHIIα-2 With Sensor Card
Cat No.
No.8177-00
Sensor (Temp.)
Thermistor
Sensor (Hum.)
High Polymeric Resistance change type
Measuring range (Temp.)
-10 to 60.0°C
Measuring range (Hum.)
20.0 to 98 % rh (at 23 °C)
Accuracy (Temp.)
±0.5°C at 15.0 to 35.0°C ±1°C at other than above
Accuracy (Hum.)
±3% rh at 15.0 to 35.0°C (30 to 90% rh) ±7% rh at less than 10.0°C, higher than 50.0°C ±5% rh at other than above
Sato Temperature and Humidity datalogger SK-L750 Series Comes with software with graphical display on PC.
SK-L754 (Temperature and Humidity Measurement) Cat No 8870-00 with attached probe SK-L754-1 Probe Included accessories: - Software CD - USB Cable - Wall USB Charger - Memory Card - Memory card reader - Batteries and manual
Sato Temperature and Humidity datalogger SK-L750 Series Comes with software with graphical display on PC.
SK-L754 (Temperature and Humidity Measurement) Cat No 8870-00 with remote probe (1.5m cable) SK-L754-2 Probe Included accessories: - Software CD - USB Cable - Wall USB Charger - Memory Card - Memory card reader - Batteries and manual
Sato SK-270WP-K is a simple operation waterproof digital thermometer. Ideal for plants, laboratories, food factories and like that are required temperature management at the site using water.
Sato Thermohygrograph NSII-Q (as known as Sato Thermohygrograph SigmaII), Part no 7210-00, comes with all transparent acryl-resin made case provides a full view of the chart paper without opening the case
Features: * The required time cycle is selected by simply pushing the changeover switch * Recording charts is made by non-dust paper and it is with holes for easy binding in a file .
Sato Drip Proof Digital Thermometer PC-9215 (Cat No: 1747-00) is a portable light-weight body with a wide measuring range of –50 to 150°C contributes to versatile application. Max./min. display function, display hold function available.
The testo 174H allows you to monitor temperature and humidity sensitive goods – including foods, archives or metal parts that are susceptible to surface rust – or carry out discreet humidity checks in buildings to ensure that the property is being properly looked after by the tenants.
The testo 174H mini data logger has built-in longlife sensors that can measure the temperature and humidity of the surrounding environment, a memory for up to 16 000 measurements and an easy-to-read display that shows the current reading as well as any breached thresholds.
This item comes with the 174H datalogger AND the USB Cradle. You will need at least ONE USB Cradle to work.
Sato Temperature and Humidity datalogger SK-L750 Series Comes with software with graphical display on PC.
SK-L754 (Temperature and Humidity Measurement) Cat No 8870-00 with attached probe SK-L754-1 Probe Included accessories: - Software CD - USB Cable - Wall USB Charger - Memory Card - Memory card reader - Batteries and manual
The testo 174H allows you to monitor temperature and humidity sensitive goods – including foods, archives or metal parts that are susceptible to surface rust – or carry out discreet humidity checks in buildings to ensure that the property is being properly looked after by the tenants.
The testo 174H mini data logger has built-in longlife sensors that can measure the temperature and humidity of the surrounding environment, a memory for up to 16 000 measurements and an easy-to-read display that shows the current reading as well as any breached thresholds.
Sato Digital Min-Max Thermometer PC-3500 (Cat No: 1740-50) is Equipped with an internal sensor and an external probe, PC-3500 displays the temperature obtained from either one of them, along with minimum and maximum values during measurement simultaneously. * Sensors are not replaceable.
Anritsu Temperature Datalogger Model AM-8000 series thermometers are compact handheld units that store measurement data in memory. Data held in memory can then be transferred to a PC via dedicated software for later analysis or other use.
Anritsu Temperature Datalogger Model AM-8000 series thermometers are compact handheld units that store measurement data in memory. Data held in memory can then be transferred to a PC via dedicated software for later analysis or other use.
Sato Temperature and Humidity datalogger SK-L750 Series Comes with software with graphical display on PC.
SK-L754 (Temperature and Humidity Measurement) Cat No 8870-00 with remote probe (1.5m cable) SK-L754-2 Probe Included accessories: - Software CD - USB Cable - Wall USB Charger - Memory Card - Memory card reader - Batteries and manual
Sato Thermohygrograph NSII-Q (as known as Sato Thermohygrograph SigmaII), Part no 7211-00, comes with all transparent acryl-resin made case provides a full view of the chart paper without opening the case
Features: * The required time cycle is selected by simply pushing the changeover switch * Recording charts is made by non-dust paper and it is with holes for easy binding in a file .