Active filters

Availability: 10 In Stock

Draw and dispense liquids with this 25 mL silicone pipette filler. Its three-valve bulb lets you expel air, draw liquid into a compatible pipette and control its release—without mouth pipetting.

Suitable for many standard glass measuring pipettes. One filler supplied; pipette sold separately. Check the fit before ordering, particularly for small plastic pipettes.

Availability: 11 In Stock

Choose Advantec No. 5A for fast filtration of coarse and gelatinous precipitates during quantitative analysis. These circular filter papers measure 47 mm in diameter and have approximately 7 µm particle retention.

100 sheets per pack. The low ash content of approximately 0.01% makes No. 5A suitable for analytical work where filter residue matters. Check that the 47 mm diameter fits your filtration setup before ordering.

Availability: 2 In Stock

Keep your Dickson chart recorder ready for its next recording cycle. Choose the pen pack that matches your recorder and measurement channel: P222 red for temperature, P226 blue for humidity, or P246 mixed red and blue. Each selection contains six pens. Stock status and lead time update with your chosen pack.

Dickson Circular Chart Paper

Price $110.00
Availability: 2 In Stock

Original Dickson circular chart paper for compatible chart recorders. Match the chart reference, diameter, recording period and printed scale to your existing chart.

Each option supplies one pack of 60 charts. Select the reference printed on your existing chart before adding to cart; the selected option’s price and availability appear above.

Availability: 5 In Stock

The Dickson SL4100 records temperature on a 4-inch circular chart while showing the current reading on its LCD. Select a 24-hour or 7-day chart rotation to suit your monitoring schedule.

  • Temperature range: −18 to 37°C (0 to 100°F)
  • Freestanding or wall mounted; powered by one replaceable AA battery
  • Includes one battery and red pen; chart paper sold separately
Availability: 2 In Stock

Keep your Isuzu thermohygrograph recording with the chart paper that matches its printed scale and recording period. Choose your chart reference from the options below; each selection has its own price and availability.



Ordering tip: Check the number printed on your existing chart before selecting. Chart papers with similar names may have different scales.

Availability: 2 In Stock

Restock your compatible chart recorder with Kobayashi 200-91538KK thermal-sensitive paper. Each roll measures 210 mm wide × 27.3 m long.

Sold as one box of 10 rolls. Match the 200-91538KK reference and paper dimensions to your existing roll before adding to cart.

Availability: 10 In Stock

Keep your Honeywell DPR300 series recorder supplied with Kobayashi 46182707-001 fanfold chart paper. Each pad is approximately 308 mm wide × 35 m long.

10 pads per pack; price is for one pack. Match the 46182707-001 reference and paper width against your existing chart before ordering.

Availability: 5 In Stock

Replace your recorder paper with Kobayashi B957KK100-11T folded chart paper. It has a 0–100 printed scale, 200 mm overall width and 180 mm printed width.

You receive B957KK100-11T: 10 pads per pack. This paper is also listed under 180-100-0100-1 and B9573AN references. Check the code and scale on your existing chart before ordering.

Availability: 1 In Stock

Keep your chart recorder supplied with Kobayashi BM115492 circular chart paper. This single-sided chart has a 0–350 printed scale and is designed for a 7-day recording cycle.

100 sheets per pack. Check the chart number, scale, rotation period and size against the paper currently used in your recorder before adding to cart.

Availability: 1 In Stock

Replace the chart in your compatible Yokogawa μR recorder with Kokusai B9573AN-KC fanfold paper, supplied as an equivalent to chart reference B9573AN.

Price is for one pad, approximately 20 m long, with a 0–100 printed scale and 180 mm recording width. Check the reference on your existing paper before adding to cart.

Availability: 1 In Stock

Keep your compatible Chessell chart recorder running with Kokusai GD128970U050-KC Z-fold chart paper, a replacement for chart reference GD128970U050.

Each chart is 16 m long with a 100 mm recording width and 50 uniform divisions. This listing is for 10 pieces. Check the reference on your existing chart before ordering.

Kokusai ZM-208A Fanfold Chart Paper

Price $65.00
Availability: 4 In Stock

Restock your compatible chart recorder with Kokusai ZM-208A fanfold paper. Each pad has a 0–200 printed scale, measures 114 mm wide × 10 m long and provides a 100 mm recording area.

One order supplies 15 pads—five inner boxes containing three pads each. Check the reference on your existing chart; related references include EM-208A and KM-208A.

Availability: 1 In Stock

Restock your recorder with ZT-605 / KT-605 fanfold chart paper. The paper has a 0–150 printed scale, a 200 mm overall width and an approximately 20 m length.

Sold as one pack of 10 pieces. Match the reference and printed scale on your existing chart before adding to cart; similar-sized recorder paper may use a different range.

Availability: 10 In Stock

OEM F51079 recording pen for compatible chart recorders. Available in red, violet or blue.

  • Reference: F51079
  • Colours: Red, Violet, Blue
  • Packing: 5 pens per pack

Select your colour above. Each order quantity is for one pack of 5 pens.

Availability: 5 In Stock

Keep your Sato chart recorder ready for its next recording cycle. Choose the chart reference that matches your instrument and its recording period: 1, 7 or 32 days for selected Sigma II models, 7 days for Mini-Cube and Mini-Alpha, or the appropriate Rotona chart.

Select the exact chart reference before adding to cart. NSII-BQ charts record air pressure and are not interchangeable with temperature and humidity charts. Price and availability depend on the selected pack.

Availability: Out of stock

Humidity and temperature at a glance. The Sato Highest I (7540-00) pairs a precision hair hygrometer with a glass thermometer in one easy-to-read instrument. Check 20–100% RH and −10 to 50°C during routine indoor inspections, without batteries or a data logger.

Availability: 1 In Stock

Check room temperature and humidity at a glance with the Sato Highest II 7542-00. A clear analog dial shows relative humidity, while a separate digital display shows temperature to 0.1°C.

The supplied bracket makes wall installation straightforward. Ideal for local room checks where staff need visible readings without connecting a computer or changing chart paper.

Availability: 2 In Stock

See the current, highest and lowest temperature together with the Sato PC-3500 digital thermometer. Connect its supplied 3 m probe to measure away from the display, or disconnect it to use the built-in sensor.

Manufacturer-discontinued; available while remaining stock lasts. This listing is for the PC-3500 (Cat. No. 1740-50) with its external probe and LR44 battery. Press RESET when starting a new monitoring period or switching measurement locations.

Availability: 2 In Stock

Sato PC-5410TRH is a digital temperature and humidity meter with a large LCD for checking indoor conditions at a glance. Current readings and the highest and lowest values are displayed together.

  • Temperature: 0.0 to 50.0°C; humidity: 20.0 to 95.0%rh
  • Adjustable upper and lower limits with LED and buzzer alerts
  • Desktop stand and wall-hanging provision
  • Sato catalogue no. 1074-10; successor to PC-5400TRH
Availability: 2 In Stock

Take quick contact temperature readings with the compact Sato PC-9215 (1747-00). Its fixed stainless-steel probe measures from −50 to 150°C, while MAX/MIN and HOLD functions make readings easier to review.

This is the original drip-proof PC-9215, supplied with a clip-on probe sheath and an LR1130 button battery. Check the model number if you are replacing a PC-9215II; the two versions have different specifications.

Availability: 2 In Stock

Keep a visible paper record of temperature and humidity with the Sato Sigma II NSII-Q thermohygrograph. Its clear cover lets you check the chart at a glance, while the quartz clock supports 1-day, 7-day or 32-day recording.

Choose your temperature range: 7210-00 measures −15 to 40°C; 7211-00 measures −10 to 50°C. Both measure 0 to 100% RH. Select the model that matches your site conditions before adding to cart.

Availability: 1 In Stock

Check temperatures, save readings and receive an audible alert when a set limit is reached. This Sato SK-1260 set includes the SK-S100K Type K probe for liquids, viscous liquids and semisolid materials.

The supplied probe is rated from −100 to 300°C; the meter displays readings from −99.9°C with this probe. The set also includes four AAA batteries, a carrying pouch and an instruction manual. Other probes and the printer are sold separately.

Availability: 1 In Stock

Check heat conditions at worksites, sports facilities and outdoor activity areas with the Sato SK-170GT WBGT monitor. Its built-in black globe accounts for radiant heat while the instrument displays WBGT, air temperature, globe temperature and relative humidity.

Choose indoor or outdoor measurement mode, set a WBGT alarm and review maximum or minimum readings. One 9 V battery and a hard carrying case are included.

Availability: 2 In Stock

Check temperatures in food preparation, production and laboratory work with the Sato SK-270WP-K. This ready-to-use set includes the S270WP-01 standard probe, which measures from −40.0 to 250.0°C.

The thermometer starts measuring when switched on and has a HOLD function for reading the display. Its body is IP67 rated when the probe is correctly connected. Two AAA batteries, a neck strap and a protective vinyl cover are included.

Availability: Out of stock

Record temperature and humidity with the Sato SK-L754 data logger. Choose the probe position that suits your installation: SK-L754-1 plugs directly into the logger, while SK-L754-2 has a 1.6 m cable so the sensing tip can be positioned away from it.

Select your probe before adding to cart. Each option includes one SK-L754 logger and one selected probe. Price and availability update with your choice. The logger stores up to 16,000 readings per channel for later PC review.

Availability: 2 In Stock

Keep your existing Sato SK-L200THIIα temperature and humidity datalogger in service. Choose the SK-LTHIIα-1 plug-in probe or the SK-LTHIIα-2 remote probe with 1.5 m cable. Each option is one replacement probe only; the discontinued logger is not included.

Select your probe model to see its price and stock status. These legacy probes are not interchangeable with probes for the newer SK-L754 datalogger.

Availability: 3 In Stock

Start a countdown by holding your hand over the sensor—useful at handwashing stations, food preparation areas and workstations where repeated timing is needed.

Choose your model: TM-27 (1707-20) for short 5–90 second intervals in 5-second steps, or TM-29 (1707-30) for 1 second to 99 minutes 59 seconds in 1-second steps. Each selection supplies one timer; price and availability should update with the selected model.