Digital Thermohygrograph with memory card recording
Sekonic Digital Thermohygrograph ST50M with memory card recording.
It records on chart paper and/or memory card. The data is ready to export to Excel (.csv) format.
High Molecular Electrostatic Capacity Sensor
|－20 to 50℃ / －4 to 122゜F
－20 to 80℃ / －4 to 176゜F（with sensor Extension Cable）
20 to 90%RH（No Condensation）
0 to 100%RH（with Sensor Extension Cable, No Condensation）
- Dew Point
- Absolute Humidity
- LCD Display
|0.1℃ / 0.1゜F 0.1%RH
－20 to 80℃ / －4 to 176゜F
0 to 100%RH
（－80 to 80℃ / －112 to 176゜F）
（0 to 290g/㎡）
Year, Month, Date, Time（24 hours）
Battery Checker, Alarm, Chart Speed, Setup Mode, etc
|Z-Fold Type, 12m / 39.37feet（Length）113㎜ / 4.45inch（Width）
100㎜（3.94inch）for record both Temperature and Humidity Sprocket
± 3㎜ / 0.12inch（at 12m / 39.37 feet. Long Recording）
|±1.0℃ / ±1.8゜F at 0 to 50℃ / 32 to 122゜F
± 3 %RH（at 25℃ / 77゜F）
*Accuracy Guarantee Range on Humidity is 10 to 90%RH
1 or 2 Point
|Recording Range||User Selectable among
①②③ with Switch
①－20 to 80℃ / －4 to 176゜F
② 0 to 50℃ / 32 to 122゜F
① 0 to 100%RH
②±10%RH or ±25%RH
Capacity of recording
|SD CARD（128MB to 2 GB）＊1
Maximum 16 months（Recorded per 1 minutes）
|－20 to 50℃ / －4 to 122゜F
20 to 90%RH （No Condensation)
AC Adaptor Inlet
|LR20, 1.5V x 4 pcs
Input 9 V 500mA
|W x H x D（mm / inch）,
㎏, lbs（Without Batteries）
|300 x 245 x 105 ㎜ / 11.8 x 9.6 x 4.1 inch,
|Other Features||Desktop or Wall Mount Socket （ 2 holes）
3 ㎜（0.12 inch）marking on Temperature / Humidity Recording Pen Position Adjustment Automatically, or with Switch
|Standard Accessories||LR20, 1.5V x 4
1 Pcs Chart Paper
1 Pcs Blue / Red Fiber Tip Pen
|Option Accessories||Sensor Extension Cable
（ 5 m / 16.40feet, 20m / 65.62feet, 50m / 164.04feet）
Chart Paper（ 5 Sheets / Box）
Chart Pen（ 2 Blue & 2 Red pens）/ Box
・Features and Specifications are subject to change without notice.
・*1:This SD recorder is not supported SDHC format(4GB or more)
|Name of product||Model number||Supplement|
|Option||Extension Cable 5M||HE04|
|Extension Cable 20M||HE05|
|Extension Cable 50M||HE06|
|external control output unit||HE09||One point of common output|
|Consumables||Usual chart paper||HE12||5pcs/set|
|cartridge pen||HE13||2red & 2 blue/set|
|Clean chart paper||HE11||5pcs/set|
14 other products in the same category:
Sato 4-channel datalogger SK-L400T for temperature measurement with K type themocouple probes.
Possible to simultaneously display four temperatures from four different locations on the large LCD. The measured values can be logged on the SD card.
NB. Probes are separately purchased, not included in the main unit.
Monnit ALTA Soil Moisture Sensor measures soil moisture tension and soil temperature within the soil. It uses a resistive granular matrix element to accurately measure the matric water potential (soil moisture tension) in the soil and a thermistor based temperature element to measure temperature.
- Safe to use in both hot and freezing temperatures
- Reports matric potential (soil water tension) which is the best indicator of water availability in the soil.
- Moisture readings in centibar and kPa
- 0 to 240 centibar (kPA)
- Will not dissolve in soil
- Internally compensated for commonly found salinity levels
- Easy to install and use compared to traditional tensiometers
- Stainless steel electrodes
- No maintenance required
- Temperature readings in C/F.
- 5 ft removable lead
Monnit ALTA® Wireless Thermocouple Sensors leverage Monnit’s award-winning remote monitoring platform to remotely monitor high-temperature applications, such as commercial ovens, kilns, and chimneys. Users benefit from a wireless data transmission range of 1,200+ ft, bank-grade security, and a temperature range of up to 400°C (752°F).
Monnit’s thermocouple is user-programmed to sleep for a specified interval, awake, capture analog data, and then convert this measurement into a temperature. If the sensor captures temperatures outside of user-specified thresholds, an alert is sent via text, email, or call. Monnit’s hardwired thermocouples feature a needle-style probe at the end of a 6’ lead (a K-Type Quick Connect Thermocouple is also available).
CD-ROM for data analysis software and real-time transmission software is attached as accessories.
Three types of probes are sold separately.
The Tempmate S1 USB temperature data logger is perfectly adapted to the cold chain applications in the food industry (storage and transport ), but also for monitoring for all types of goods: pharmaceuticals, blood, transportation of works of art, flowers, paper, …
Sato SK-RHC-1 Temperature Transmitter is electric current 4 to 20mA output type in the SK-RHC series temperature/humidity transmitters.
3 types of probe are provided for SK-RHC series transmitters.
Select the suitable probe to your usage.
AC adapter is available at option.
(The probe shown in the photo is the plug-in type)